So Think I have it done to 4 boards.
EVGA 141-GT-E770-A1 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 Extended ATX Intel Motherboard

ASUS Rampage III Formula LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX...

Yeah I have been hearing alot about the Sabertooth motherboards but I will having problems with spacing and my wi-fi card since I have 2 dual slot video cards it leave me no room for my PCI wifi...

Oh also I would like to stay under $300 for the board

So I am looking into upgrading my q6600 quad core 2.4 (3.0 OC). Going into the whole I9 series and was wonder what would be the best X58 Board is to get. I like Evga but I am hearing bad thing about...

there actually been pulled out of a different machine running windows 7 as they are just my data drives for storage, programs, and pictures. Since have that I do not have that system anymore.

As...

I have 2 WD 320gb HD's in a raid 0 setup, (non boot raid) when windows 7 loads it says it needs to scan the disk because of data corruption or something to that effect. Scans to 7% show some bad...

still can't get this chip to run at 2.6 Ghz with this ZNF-250 the most I get is 1400 with. Is there a bios that I am missing I think have the lastest one for it. Any Ideas would be greatfull

Okay got a working 4000+ But I can't get the thing to work right is there some kind of votalge and mutiplyer set up for those? Because Auto it only runs at 800 Hmz and if I change the timing above 8...

Well I reset the Cmos, even bought a new PSU, still power on for 2 secs than nothing.

So I am thinking either the ZNF-250 does not support the Athlon 754 Mobile 4000+ 2.6 Ghz, or the Cpu is bad...

Unplug the PSU?

No I did not clear the bios didn't know I had to.

It's an Ultra 500 watt

Specifications


AC INPUT 115V/230V 10A/6A 60/50Hz

Just got the chip today went ahead and took the risk and bought, so I got the MSI Mobile Pad which is awesome by the way makes it like the desktop chips.

So anyways pop it in, put the pad on lock...

Anybody know if the ZNF3-250 will support the Socket 754 Moblie 4000+

Okay So I'm able to set my multi 10x, fsb 240, Ht x3, and my ram locked at 166, and I get it stable in windows @ 2410mhz but anytime I power down the machine and when it run on it goes into some kind...

:confused: Still lost and confusd on this 64 3400 co rev. :confused:

:biggrin: AMD 64 3400+
ZNF3-250
1024MB XMS PRO SINGLE STICK
GEFORCE 5600 256 O.C.
160 HD SERIAL ATA

:D So here we go ( I feel like I'm beating a dead horse :bang: ). I have an Athlon 64 3400+ co, not ca w/ the newest updated bios on a znf3-250 motherboard. So I take I can't overclock it in the...

Okay I do have a co rev 3400, so is it posible to overclock this cpu are there any trick to doing it or am I stuck.


specs:
Znf3-250
Amd 64 3400+ 1mb
Cosiar XMS 3200 1024mb , single stick...

I don't see the option on my bios to change the ram timing from 1t to 2t, so does this mean I can't overclock,

Still cannot get the computer to be stable in windows after overclocking. need some suggestions?

My Specs

Athlon 64 3400+ 1MB cacher ver.
Znf3-250
Corsair Xms Pro 3200 1GB chip
Geforce 5600...

Sorry meant 2410 mhz Is what I meant, is what the boot up says, set with 10x multi, and 240fsb, 3x htt

I've used to Wcpid and it say 980 mhz with mutli 4x, but when I boot up it show it running at 3410 mhz, I have it set at 10x mutli with a 240 fsb and htt 3x.

Okay, trying to overclock my 64 3400 on the znf-250 with the I gig dimm pc3200 corsair pro xms.

and I either get windows locking up or booting if I change my fsb to 220 and the htt 3x, and leaving...

I've come to the conclusion that my memeory is keeping me from overclocking I try 220 fsb and windows keeps rebooting or becoming unstable is there I trick I'm missing or is it windows and not my...

Need to know the best overclocking setting for the A64 3400, also updated the new bios, can't find the multi and it freezes when I access the hammer fid control.

Znf3-250
Athlon 64 3400
Corsair...