Well, I got mine up to 850 core, 1900 shader and 1300 memory.

The problem I had with mine was: the heatsink was not attached properly and my temps were running near 80C while gaming. I just...

It's unfortunate. I've spent near a decade browsing and posting on this site, and the decline over the past few years has been rough.

But, as others have already pointed out, times change. And...

My how the forums have changed since the last time I posted in here. This forum has been my home for the better part of a decade.

So, I'll post this here, though I don't know exactly how many...

I just bought a 960T, after I blew out my7750 trying to super clock it, lol.

i must say, it's a HUGE improvement. I am even able to unlock both additional cores. I just got it 2 nights ago, and...

That about sums up a gigabyte motherboard perfectly.

The only issues I've ever had with onboard sound with they never seemed to be loud enough. I always had to add another 20dB in foobar. Otherwise, it is just barely loud enough through my...

Notebook memory usually installs at an angle; did you do that, or did you try and ram it in there straight on?

If the laptop is working, then I assume everything is functioning correctly, but...

This is the problem with benchmarks -- they don't tell the entire story; suffice it to say, the difference between dual channel and single channel is the bus width is doubled (64bits x 2 = 128bit). ...

Just a word of caution: some motherboards do not play nice with memory speeds higher than 1000mhz. I found this out when I got my hands on some 1066mhz ram (thank god it was free). It will work...

Dunno what C3 or C6 are; sound like Intel features to me.

As for C1E it will down clock the CPU and lower the voltage while the CPU is idling or using very cpu limited applications.

I disable...

Late to this thread, but I don't understand the reasoning behind this; if it was a separate physical drive, then maybe, just maybe I could see doing this. However, creating another partition is...

7's VM support is pretty good. If I really, really need it, I'll use it. I've been using 7 now since it came out with no problems to report.

I'm not sure what you mean. The information on the array is stored on the HDs themselves, not on the controller. So, whether the drives are configured as RAID or independently, the original RAID...

Dumb question...but,

Is it possible that the BIOS is not setting the voltage properly? Might be worth looking into it. Never assume, especially with a beta bios, that it is all set properly.

Personally, I think RAID is overrated, but it depends which flavor you are going with? RAID 1, too me, is overkill either way, just backup if that is a concern. Of course, if you are doing anything...

The only problems I have with onboard sound is the gain never seems high enough. Maxed out, it's just "loud" enough for modern music. Anything back in the 80s or even early 90's, I have a lot of...

Yes, disabling hardware acceleration will decrease performance.

This is because of how an overlay works. They are rarely seen by normal screen capture softwares, and are very common amongst TV...

I stand corrected, but my main point was, I've never experienced any of the problems others have with Creative cards or their drivers. Maybe it's because I don't use half the features they support,...

I'd be curious to see how the reviews pan out for it. Their previous cards were very good, even for an XFI, and were not using the Creative drivers. This, in and of itself, made it a much better...

Not that I'm aware of, and online, people doing crazy stuff to bring it back under control. When I mean crazy, they are added resistors and things like that. Well over my head and ability to do,...

Not sure it's really resetting it; use Z-CPU to verify that. For me, I have my Vcore set at 1.475V, but AMD overdrive detects it as 1.325 (default for my processor), same applies to the CPU NB. For...

The only thing I'd be concerned with is the memory voltage. I've had 2 GB boards now, the MA770-UD3 and the MA790X-UD4P, and both had overvolts on the memory. My memory is only rated @ 1.8V.

The...

Ok, well now i'm confused. I was getting a lot of freezes when running 3dmark for more than a few passes, and still my rig would freeze when listening to music. Obvious HTL issue there, more...

Yeah, I've been messing around with ACC, as well. I'm forced to use it to even get 3.1 stable at a reasonable voltage. Mine scales very well, basically .050V per 100mhz, starting @ 3.1. Following...

http://img704.imageshack.us/img704/4162/3390.th.png

Well, I honestly have no idea what I did, but it works at 3390 now. All I can remember doing different was increasing the HTL from 18xx to...