I read on other forums it was possible to get wireless networking or networking support on the ASUS O!PLay devices which do not have wireless or networking capabilities. I think it is in the...

Flashed new firmware on the ddr2200 and it fixed the issue. The network has greatly improved stability compared to the ddr2200 alone.

The DDR2200 seems to be very undependable and our Access Points go down a lot so we were going to try the WRT110 to control dhcp and ppoe to improve stability. I don't get why the router internet...

Okay so we have 25mbps service on bonded dsl line to the cisco ddr2200 and I set it to bridge mode. Plugged an ethernet cable from port 1 on the ddr2200 to the internet port on the linksys wrt110. ...

Since the DDR2200 is in bridge mode all of its functions are disabled and only the Linksys WRT110 is doing all the work including DHCP and PPOE authentication. Maybe it needs a firmware upgrade?

no that's the problem it says internet is connected in the internet status of the router but computers have no internet access. The first dns server is 192.168.1.1 and then there are 4 more the...

Hi I have a CISCO DDR2200 which is the modem for bonded 20mbps and it works over the cisco since the cisco sends out only the 2 dns servers to dhcp users and we can get online. When I bridge the...

I did another fresh windows install and randomly after installing the nvidia smbus driver when it booted it was messed up. So, I guess it is in fact the smbus driver im installing possibly? I need...

Okay ill check it out. I'm 100% sure heat is not causing the instability. I bought a new 18.5V 6.5A charger for more power from the 3.5A one. Anyway my temps are like 29*C at idle on the cpu and...

Ok, so I have an hp dv2615nr and its running a tl-68 turion x2 from 2.4Ghz to 2.6Ghz but is unstable at 2.6Ghz so I'll dial back to 2.5Ghz. Anyway, I have a modded driver which allows the 7150M...

I modded my asus k53 with an air intake under the laptop and pulled the pwm blue wire on the fan connector so it runs at full 5v constantly and isn't very loud. I ran 100 runs of intelburntest at...

I have an asus k53sv-xr1 and it has a Core i7 2720QM 2.2Ghz and in turbo boost it sits at 3Ghz. I can't figure out why when I set the minimum to 100% and the max to 100% when plugged in it still...

I keep getting a continuous A clock interrupt was not received on a secondary processor in the allotted time interval in windows 7 x64 on an ASUS A8R-MX/SI. With that same 0402 Bios I believe is...

I appreciate your advice. Yeah actually we use the rig for lan parties and can game for 24 hours on r6 vegas 2 with 1 monitor. There's some kind of internal firmware based bios issue entering a...

It's completely stable and I modded the bios to 750Mhz and it's completely stable. I ran it through vantage 10 times in a row without failure. It never exceeded 60C the whole time.

I'll test the...

*UPDATE*
It'll work if the card is at stock clocks. I only overclock the core clock from 625mhz to 700mhz and it won't work. Both screens start flashing and the computer reboots.

If I leave it...

Well it's official the Radeon HD 4850 can't handle dual displays while in game NO MATTER WHAT?!? This is extremely lame... I can game for 24 hours on 1 display then while in game I plug in the...

I uninstalled all ati drivers. Then I installed the 12.4 driver only in device manager for the radeon hd 4850 and it started and looked like it was working until it crashed again. It got a lot...

So when running a single dvi display to the radeon 4850 with the latest catalyst 12.4 windows 7 x64 the game starts and I can play it without a problem.

When starting the game with dual displays...

Everytime I plug into hdmi on my home theater receiver it defaults to 2 channel stereo and I have to go into speaker setup every single time to set it back to 5.1 channels. It's crazy annoying. How...

Anyway this is possible on a A8R-MX/SI? What's the Clock generator number on the MVP?

I'm stuck at 1.344V in bios and it's not adjustable. I have HT ratio, cpu frequency up to 250Mhz but limited...

I know I'm digging this thread from the grave. I just had a question about speed up r6vegas on an hp laptop. Running a AMD Athlon 64 X2 TL-68 2.4Ghz Dual Core to 2.6Ghz, 4GB DDR2-800, and a 128MB...

i finally flashed it using a .bin in the awd flash app in dos. The board is still continuously locking up and refusing to post. It takes 20 restarts to get it to post and then it just locks up in a...

I have a Biostar TForce 6100 939 board and I'm trying to flash the latest bios. I downloaded a windows 98 boot cd, and it works fine. So I download the awd894.exe as well as a few other versions. ...

Yep did it. It only applied to some directories. Why wouldn't it apply to all? I un-applied then re-applied and re-did like 20 times. Why doesn't it work automatically? Anyway to set the command...