I don't see a RX1000.... maybe you mean RM1000 ? Not sure exactly what you have. The CP-8920217 cables are type 4 gen 4 cables.
There is a compatibility chart here, maybe you need type 3 for RM1000...

PS ? Are you able to check the voltages ?
Do you see your ram on GSKILL memory configurator for your board ?...

Unless you are using a USB modem, you should not need any drivers for ethernet connection to modem.
Firmware for the modem can be updated though.
Probably something else on the pc that was changed.

Use something like this:
https://www.startech.com/Cables/USB-3.0/2-port-Panel-Mount-USB-3-Cable-USB-A-to-Motherboard-Header~USB3SPNLAFHD

Hmm ...Kind of weird that your post is almost word for word like this one
http://forums.pcper.com/showthread.php?480813-Vertex-450-password

It looks like all your local ota hd stations are in the same direction (portland) and only 15-20 miles away. You might be surprised at what you can pick up on an inexpensive indoor antenna. I...

Perhaps some problem with the ground wire at outlet and/or ground on chassis.Does hard drive burn up if you don't let the hard drive touch the chassis anywhere...ie leave it outside the chassis with...

Is the power connection to the drive a sata or molex connector....or using a molex to sata adapter? What are you using in common with both systems ?
in any case check the wiring, i have had in the...

Some more here on error of failure to copy boot drivers.
https://www.disk-partition.com/articles/bcdboot-failure-when-attempting-to-copy-boot-files.html


but otherwise I am out of ideas.

usb drive should not be in a usb 3 port. Some say this gives failure to copy boot drivers.

Is this an oem win7 install ? like a dell that may have some kind of special recovery stuff ?
Bootrec /Scanos should find all os's.
Did you have dual boot at any time ?
Running out of ideas, but...

I don't think attempting to fix the registry will do anything if you can't see a windows partition.

Can you run disk manager from the usb to see how that drive d shows up ? Is the boot partition...

sounds like it might be mbr boot manager type problems. Above link has fixes for that

But if registry is corrupt then maybe this...

I am not sure that a startup repair from a bootable win7 usb drive is the same as from a win7 install media ????

see this also...

It's my recollection that you might have to run startup repair a few times.Are you running the repair from a windows install disk ?

Don't think so...



https://www.amd.com/en/support/kb/faq/dh-018

Did you try doing a system restore to time before the problem occurred ? Usually a system restore point is created automatically on a driver update or on a time basis.

you can often use an optical splitter if you want to feed 2 inputs from one output. Does not work in all cases though.
...

I use my shield mostly for ota tv, there is a nice tv guide and pvr using the live channels app and hauppauge usb tv tuner.Here's a cheap usb ssd https://www.ebay.com/itm/132646271030

I am using a samsung t5 250gb with my shield. It's very fast and is basically a ssd with usb3 interface. It's very small. Can find it for just under $100.
Otherwise search in newegg for portable ssd...

A pci-e is incompatible with an agp slot, so you are out of luck if you want to keep that old board running without buying/finding another agp somewhere.(ebay ?)
Maybe measure the fan mounting to...

same question here
https://forums.geforce.com/default/topic/1022358/geforce-basics/titan-x-pascal-and-titan-xp-in-sli-/

Maybe some clue here
http://forum.asrock.com/forum_posts.asp?TID=5784&title=x370-taichi-system-no-post-dr-debug-46

Are you installing as an administrator ? ie right click on dxsetup and run as admin?

If you bought a win7 licence (non oem) then you can legally transfer it to another device, as long as it is only installed on one computer at a time.