Were should i start?

[Ntskamer]

My styem was working fine till i decided to sleeve the cables, when i reconnected it doesnt post. All i get is a series of beeps and balck on my monitor. Everything has power but nothing appears on the srceen and the only thing the sytem does is beep.

Any thought on were i should look to find what may be wrong. The beeps are in a long series of about six then it stops then they begin again.

[HOOD]

Ntskamer
Sounds like the AGP card or possibly the memory is not seated propperly. The AGP is very easy to dislodge slightly so I would suggest you try and reseat both that and the memory.
Hood

[Ntskamer]

Ill need to try that when i get home, would the sytem still turn on with a bad stick of memmory?

[little john]

Here's some other beep codes: Didn't know what bios you had

Award and Phoenix BIOS:

1 short beep: Normal
2 short beeps: CMOS error
1 long and 1 short beep: DRAM error
1 long and 2 short beeps: Video card error
1 long and 3 short beeps: Keyboard error
1 long and 9 short beeps: ROM error
Long continuous beeps: DRAM not installed correctly
Short continuous beeps: Bad power supply

AMI BIOS:

1 short beep: DRAM flash error
2 short beeps: DRAM ECC check error
3 short beeps: DRAM detect error
5 short beeps: CPU error
6 short beeps: Keyboard error
8 short beeps: Video card error
9 short beeps: ROM error
1 long and 3 short beeps: Bad DRAM
1 long and 8 short beeps: Video card error

[Ntskamer]

It was just the video card had got lose, damn leadtek with it humngous heatsink. i guess it was that 8 beep code it was giving thank for the codes im sure they will help others.

[Stress]

=] Thanks for those codes, helps out alot!