Results 1 to 4 of 4

Thread: BIOS UPDATE

  1. #1
    Guest

    Thumbs down

    I have the K7M and I cannot update the bios with the 1009 bios file in Windows 2000. I tried booting up with the Windows98 boot disk and I ran the flash utility and the program said that it couldn't find the bios file even though it was typed in right. Does anyone have any solutions to this problem?

    [This message has been edited by impulse_5 (edited 05-17-2000).]

  2. #2
    Guest

    Post

    Check the KM1009.bin file properties and make sure that the Read-only box isn't checked.

  3. #3
    Guest

    Lightbulb

    I just got it to work by putting the file in a different directory than the flash app.
    A:\k7mflash.exe
    then point it to
    A:\(Some directory name)\km1009.bin

    hope it works for you too

  4. #4
    Guest

    Post

    I had the same problem. Here's the solution:
    1. Rt click on your bios 1009.bin file.
    2. Un-check read-only.
    3. You're done. Run your flash utility again and it will find it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •