E6700 @ 3.85Ghz / P5W DH Deluxe / 2GB SuperTalent 6400 / X1950XTX
PC Power & Cooling 750W Silencer
Mountain Mods U2-UFO Cube
Storm G5 --> MP-01 --> PA 120.3 --> 2x DDC Ultras in Series --> Custom Clear Res
"Artificial intelligence is no match for natural stupidity."
1,223,460+ Ghz Folding@Home
Last edited by SCompRacer; 07-06-2003 at 07:51 PM.
Innovatek CPU waterblock rev 3
Innovatek GPU GF4 waterblock
Innovatek Aluminum Tank
120mm Black Ice Extreme Chrome Radiator
Eheim 1048 Pump
All fittings on pump, tank and waterblocks replaced w/ 3/8" OD fittings.
3/8" ID Tubing
Last edited by GameOn; 07-24-2002 at 03:30 PM.
the rig: Abit KX7-333R, AMD XP 2.1Ghz, 512mb corsair xms3000, 2x 60GB 60GXP ATA100 IBM HD, 2x 20GB IBM, Leadtek FX 5900 128MB, Hauppauge WinTV PVR350, Audigy Sound Card
My machine is below
Ford pickup heater core, MagDrive pump, Maze2 block 1-120mm fan on radiator, 2-90mm fans on rheostats for case
well the review gods have been kind and i have been graced with a brand new setup...
heres the pics...
Yellow aluminum chenming full tower, BIP firebrand rad, Maze3, Eheim pump on the way...
Last edited by xCygnus_x_1x; 09-05-2002 at 12:50 AM.
Latest pics of my rig..
Well, my wc system isn't in my case but here they are:
Couple of pics of the mobo tray with the hose fittings.
This is my latest water cooled case project, an AMS Mid Tower, that I finally finished. I tried painting the drives to match the blue tint of the acrylic but couldn't get the desired effect so I repainted them silver instead. I'll probably do a window in the future, but it isn't my main PC so it can wait.
The reason the case appealed to me was the 120mm exhaust fan. I air cooled in this case for a week before it was converted to water and had moved the original 120mm exhaust fan to the front of case, replacing the original 80mm intake. Additional holes were drilled in the front cover that matched the original pattern of three rows of holes. The holes were later enlarged to 1/4" for more airflow.
The BIX wouldn't quite fit between the edge of case and the kickout that allows the angle where the expansion cards attach, so it stands off from the back of the case slightly with some closed cell foam filling the gap. It acts as a shroud extension to get the fan further from the core of the BIX. A 69CFM 120mm Panaflo is mounted on the rear outside of case.
I couldn't get the system to bleed using that small round DD reservoir in series, so I ended up putting a T in and used the res as a fill line/air trap. The flow would hit the sidewall and cause bubbles that would get recirculated through the system. The longer it ran, the worse it got.
It is a very quiet case. A full page of detailed small photos linked to larger ones can be found here.
Last edited by SCompRacer; 09-15-2002 at 02:18 PM.
With a carcooler:
Sorry, sorry for my triple-posting !!!
Athlon XP 1600@REAL1700 35°C Norm 48°C Last(Watercooled, see my homepage),VCore 1,85V KT3 Ultra2 Via4in1 4.42
512 DDR CL2 2.6V
Geforce2 GTS Pro 64MB AGP 1.6V - Det 40.41
RAID 2x Maxtor á 80GB Sil0680 Slot2
LG DVD DRD8120B
LG R/RW GCE-8320B
DD Maze 3, DD Z-chipset, Eheim 1250, Dual Black Ice Micros in parellel, 3/8" Tygon tubing, and Innovatek Tank-O-Matic.
I removed the 2 fans in front of my Lian-Li PC60. I also removed the drive cage.
Then I mounted the Rads inside of the 2 fan holes, followed by 2 fans that pull into the case.
Last edited by gb5766; 12-31-2002 at 02:12 AM.
AMD XP 2400M AQYFA 0343WPMW (10 x 240)
DFI Lanparty NFII Ultra B w/6-19 Hellfire Bios
2 X 256MB Kingston PC3200 BH-5
2 ATA WD SE 120gigs
1 ATA WD 80gig
DD Maze 3 H2O
Made some changes to my AMS mid Tower, link in sig. Finally got around to adding a GPU block to my PC. Also moved the radiator to outside rear of case.
Last edited by SCompRacer; 07-06-2003 at 07:52 PM.
finished this last week.
it's hard to see but the back is an iridescent green, the camera didn't capture it too well.
XP2700 @ 12x200, AIUCB 24
ASUS A7N8X delux
PNY ti4200 oc'ed to something
2 stick of 256 meg corsair PC3500
couple hard drive
DangerDen watercooling on CPU, chipset, GPU
some wicked mods to a chieftec case, follow the link for some pics
Brand new Samsung SyncMaster 210T - it's beautificent
Hi to all,
Just to post a couple of pics of my rig, visit my site at www.nobrains.gr , you can find the pics under the projects
Edit: The pump is from Eheim, so it is just a regular pump. You have to turn it on separatly. There are some ppl who have made some mods in order to turn it on at the same time, look around
Last edited by RoboTech; 07-10-2003 at 09:34 AM.
Finally got around to the case window. I just can't seem to draw or cut a straight line though...
That the dogs chair UncleBob? LOL
Last edited by SCompRacer; 01-19-2003 at 08:51 PM.