my 8rda+ defaults it at 2.75v, isnt this ram 2.5v though?
Buffalo 512mb pc3200 cl2.5 with winbond ch-5 chips, thanks.
Results 1 to 14 of 14
-
08-02-2003, 08:09 AM #1
Torrey is LDS!
- Joined
- Mar 2003
- Location
- Utah
- Age
- 25
- Posts
- 1,088
How many volts does buffalo ch-5 run default?
AMD Athlon 64 FX-55 ClawHammer @ 250x11
DFI Lanparty UT nF4 SLI-DR w/ 10/03/2005 Final BIOS
1GB Geil Ultra Platinum DDR500
Chaintech AE6800 Apogee Turbo
Enermax EG565AX-VE(W) (24P) 535W
3x160GB Hitachi DeskStar SATAII RAID-0 128K Stripe
Samsung Syncmaster 955DF 19"
Logitech z640 5.1 surround sound
Heatware
My Website
www.LDS.org
-
08-02-2003, 08:52 AM #2
Registered User
- Joined
- Jan 2002
- Location
- PA
- Posts
- 61
I thought ram was 2.6v default..
-
08-02-2003, 12:06 PM #3
Registered User
- Joined
- Jan 2003
- Location
- Peru, Illinois
- Posts
- 6,175
DDR memory default voltage is 2.5 volts!
Golf is a good walk spoiled! ( Mark Twain )
Abit NF7-S rev2 Barton Mobile 2500+ IQZFA 0349RPMW 11 x 210 1.8 Vcore
w SLK900A & 92mm, 56 cfm fan 32/42C
2 x WD400JD--Gainward Ti4200 8x AGP
Buffalo PC3700 Winbond BH5 2 x 256 11-2-2 at cas 2.0--2.8 V
Lite-On CD-RW / 600 watt dual fan power supply
Win XP Pro--SP1--nVidia 3.13--NEC 19" LCD
Abit NF7-S rev 2.0 Barton Mobile 2600+
AQYHA0346XPMW 11.5 x 220 = 2535.7 MHz 1.725 Vcore
SLK900A with 92mm 56 CFM fan 34/42C
Gainward FX5200 128 Mb DDR
2 x 40 Gb Maxtor ATA 133 drives
Twinmos PC3700 2 x 256 4.3ns chips 11-3-3 cas 2.0--2.9v
650 watt dual fan power supply
WinXP Pro, SP1, nVidia 3.13
-
08-02-2003, 08:32 PM #4
Buffalo PC3200 CH-5 $47
- Joined
- Apr 2003
- Location
- RI
- Posts
- 654
2.7 is default
How is your new stick running?
these are timings you can use:
11322-7322 scores better for me!
7322- I use this one
6322
5322
4322
3322John D
PAYPAL= PM for info.
HOT~HOT~HOT~ ~TwinMOS/Buffalo WINBOND CH-5 , PC3200 LOWEST $'S IN THE WORLD!
8RDA+ @ 230 FSB
AMD AXDA 2600 BOX 333FSB @ 2.5
SLK-800A 80MM
MaX ata 133/72 40G
Buffalo CH-5 2X256MB PC3200
Leadtek GF4 TI4400
52X liteon burner
16X48X liteon DVDROM
Verizon dsl 1500/128
Westell dual dsl modem
Linksys wireless 4 port switching dsl router
Addtronics modded godzilla server case with TOPOWER 520 WATT & appache 2X120MM & 2X90MM 1X80 fans
http://www.heatware.com/eval.php4?id=12129
-
08-02-2003, 11:27 PM #5
Torrey is LDS!
- Joined
- Mar 2003
- Location
- Utah
- Age
- 25
- Posts
- 1,088
yo marmaduke,
its running WAY better than those darned geil sticks. incidentally, the guy whom i sold my geil to is now havign problems with it. i mailed him the receipt from newegg so he could RMA it. GEIL = NO NO.
thx for the tips, marmaduke, but arent those timings too tight for cl2.5 ram?AMD Athlon 64 FX-55 ClawHammer @ 250x11
DFI Lanparty UT nF4 SLI-DR w/ 10/03/2005 Final BIOS
1GB Geil Ultra Platinum DDR500
Chaintech AE6800 Apogee Turbo
Enermax EG565AX-VE(W) (24P) 535W
3x160GB Hitachi DeskStar SATAII RAID-0 128K Stripe
Samsung Syncmaster 955DF 19"
Logitech z640 5.1 surround sound
Heatware
My Website
www.LDS.org
-
08-04-2003, 08:01 PM #6
Registered User
- Joined
- Aug 2003
- Posts
- 74
Ram = Simms(old) Dimms(new)
Simms run on the older 5v bar and Dimms run on the 3v bar......
-
08-04-2003, 08:41 PM #7
Registered User
- Joined
- Apr 2003
- Location
- Vancouver, BC
- Posts
- 815
i thought default was 2.5V but my old motherboard came with it set at 2.6 for stabability...
-
08-07-2003, 05:28 PM #8
Registered User
- Joined
- May 2002
- Location
- Maryland
- Posts
- 122
Bump
I have the same question. My RAM according to crucial is 2.5 volt but my boards voltage for the RAM lowest setting is 2.6 volt. Could this be a potential problem?MB
Gigabyte MA770T-UD3P AMD 770 AM3
O.S.
Windows 7
C.P.U.
Phenom II 550
Memory
4GB DDR3 1660 RAM (G-Skill)
H.D.D.
750Gb Seagate
GFX
768MB eVGA Geforce 9600GT PCIe
Case/P.S.U.
Antec Sonata II w/Smartpower 450 2.0
-
08-07-2003, 06:29 PM #9
Registered User
- Joined
- Apr 2003
- Location
- Vancouver, BC
- Posts
- 815
no all ram should run fine at 2.6Originally posted by Tony939
Bump
I have the same question. My RAM according to crucial is 2.5 volt but my boards voltage for the RAM lowest setting is 2.6 volt. Could this be a potential problem?
-
08-07-2003, 08:23 PM #10
Registered User
- Joined
- Aug 2003
- Posts
- 74
What I am saying here is Dimms run off the 3V bar.......
-
08-08-2003, 08:57 PM #11
Moderator
- Joined
- May 2001
- Posts
- 11,516
If a stick of PC3200 can't do 400FSB at 2.7v or less, that is a problem.
...Does anybody else feel like Congress simply bailed themselves out? Isn't that what they really mean by a bailout?
-
08-09-2003, 01:11 AM #12
have not kept up.
- Joined
- May 2001
- Location
- Newnan GA, USA
- Posts
- 5,628
are you trying to say 3.3v "rail" of the psu? either way only overclockers run the memory up to 3.0vOriginally posted by valky
What I am saying here is Dimms run off the 3V bar.......
acording to JEDEC ddr dims come in 3 varities 2.5v 1.8v and tbd ( reserved? to be determined? ) the kind we use is 2.5v the 3 are keyed diffrently so you cant screw up and install the wrong one in the board
Vdimm is controled by the motherboard's Voltage regulatign unit not the power supply
corsair will warenty ram up to 2.8v (dont think they can tell if you go further) so that is a pretty good indicator that 2.6-2.75should be no problem for any memoryLast edited by RavenTai; 08-09-2003 at 01:54 AM.
-
08-11-2003, 09:44 AM #13
Buffalo PC3200 CH-5 $47
- Joined
- Apr 2003
- Location
- RI
- Posts
- 654
Ratings mean nothing with Buffalo ram!yo marmaduke,
its running WAY better than those darned geil sticks. incidentally, the guy whom i sold my geil to is now havign problems with it. i mailed him the receipt from newegg so he could RMA it. GEIL = NO NO.
thx for the tips, marmaduke, but arent those timings too tight for cl2.5 ram?
The PC3200 CH-5 can do CAS2 all the way up till 460Mhz @ default voltage!.John D
PAYPAL= PM for info.
HOT~HOT~HOT~ ~TwinMOS/Buffalo WINBOND CH-5 , PC3200 LOWEST $'S IN THE WORLD!
8RDA+ @ 230 FSB
AMD AXDA 2600 BOX 333FSB @ 2.5
SLK-800A 80MM
MaX ata 133/72 40G
Buffalo CH-5 2X256MB PC3200
Leadtek GF4 TI4400
52X liteon burner
16X48X liteon DVDROM
Verizon dsl 1500/128
Westell dual dsl modem
Linksys wireless 4 port switching dsl router
Addtronics modded godzilla server case with TOPOWER 520 WATT & appache 2X120MM & 2X90MM 1X80 fans
http://www.heatware.com/eval.php4?id=12129
-
08-11-2003, 02:38 PM #14
Registered User
- Joined
- Aug 2003
- Posts
- 74
are you trying to say 3.3v "rail" of the psu?
I am not trying to but you catch on quik. Now you know what I am saying is all PSU's r different in their wattage and thats what matters to OCers. You also see I am saying that is why these boards have power controllers ................
Reply With Quote
