Going from 1700+ Palomino to a 2600+ T-Bred (333 MHz FSB)
Whats some good ram to use for this? I dont really overclock, but I do want the option open. And if i do overclock...i wanna do it hardcore, lol. Thats just how I am, so....whats some ram where it will work great with default CPU FSB...and great when i crank it for some OC'ng? I do plan on expirimenting when I et my new chip.
Results 1 to 5 of 5
Thread: Question about DDR333
-
10-25-2003, 11:51 PM #1
The Gaming God
- Joined
- Nov 2001
- Location
- Who the hell knows
- Age
- 28
- Posts
- 1,226
Question about DDR333
-
10-26-2003, 01:19 AM #2
Registered User
- Joined
- Oct 2003
- Location
- Finland
- Age
- 39
- Posts
- 49
Corsair is always a good bet. I have a stick of their XMS2700 that used to sit on an 8K3A+, where it worked quite well. Hmm, perhaps I should assemble a third PC? Only needs a gfx card and a HDD...
-
10-26-2003, 01:24 AM #3
The Gaming God
- Joined
- Nov 2001
- Location
- Who the hell knows
- Age
- 28
- Posts
- 1,226
Maybe you'd like to sell it? hehe.
-
10-26-2003, 07:50 AM #4
Registered User
- Joined
- Jan 2003
- Location
- Peru, Illinois
- Posts
- 6,175
Buffalo Technology or Twinmos PC3200 with WInbond chips
Golf is a good walk spoiled! ( Mark Twain )
Abit NF7-S rev2 Barton Mobile 2500+ IQZFA 0349RPMW 11 x 210 1.8 Vcore
w SLK900A & 92mm, 56 cfm fan 32/42C
2 x WD400JD--Gainward Ti4200 8x AGP
Buffalo PC3700 Winbond BH5 2 x 256 11-2-2 at cas 2.0--2.8 V
Lite-On CD-RW / 600 watt dual fan power supply
Win XP Pro--SP1--nVidia 3.13--NEC 19" LCD
Abit NF7-S rev 2.0 Barton Mobile 2600+
AQYHA0346XPMW 11.5 x 220 = 2535.7 MHz 1.725 Vcore
SLK900A with 92mm 56 CFM fan 34/42C
Gainward FX5200 128 Mb DDR
2 x 40 Gb Maxtor ATA 133 drives
Twinmos PC3700 2 x 256 4.3ns chips 11-3-3 cas 2.0--2.9v
650 watt dual fan power supply
WinXP Pro, SP1, nVidia 3.13
-
10-26-2003, 09:13 AM #5
Registered User
- Joined
- Jun 2003
- Posts
- 63
I'd go with TwinMos PC3700 - that way your rig will be limited by something other than the ram. I'm running FSB 216 at 2-2-3-7 sync, using 2.8V for the TwinMos sticks, and either the cpu or the mobo is the limiting factor for the FSB, not the ram. Whatever you do, get at least PC3500 CAS 2.
DFI nF4 Ultra D / BIOS Hellfire modded 5/10-2 | Venice 3800+ (CBBLE 0513CPBW) / XP 90C | 2 x 512 Mb TwinMos PC3500 Speed Premium (BH-5 UTT) | ATI X800XT / Arctic Cooler Rev 4 | Raptor + 2 x 7K250 (PATA, non RAID) | Onboard Sound | Antec TruePower 2 550W | CoolerMaster Praetorian
Reply With Quote
