Results 1 to 3 of 3

Thread: Winbond CH-6

  1. #1
    Joined
    Apr 2003
    Location
    Indonesia
    Posts
    44

    Winbond CH-6

    guys what do you think about this chip mem?

    Winbond CH-6

    i heard some people can reach 200mhz @ cl2-2-2-6

    any of you have experience with those ram?

    thanks.

  2. #2
    Joined
    Nov 2003
    Location
    Carn Dm, Angmar
    Posts
    609
    mine goes 215 @ 11-3-3-2.5 and 200 @ 11-3-2-2.0, at default 2.6V. "11" works well on my board, you could go with lower if you want. get a 512M stick of Buffalo pc3200 Ch5 for $73 at Newegg and you will get a true value

    Shuttle AN35N Ultra 400 (nForce 2)
    Barton 2400-M AQYFA 0343WPMW (209x12=2509@1.86v on air)
    old: Tbred 1800+ NIUHB 0335SPMW DLT3C (209x12=2509@1.84v on air)
    older: Duron 1400 MIXIB 0336XPMW (215x10.5=2263@1.86v on air) (256K L2 enabled)
    Buffalo PC3200 512M @ 11-2-2-2.0 : 3.31 V (PSU splice) (235 memtest stable)
    ATi Radeon 9600pro AIW @ 450/750
    Antec plain white case w/PP-303XP 300W psu (15A 12v rail) with custom 120mm lower front intake
    AMD sink with awesome plastic cup duct mod and constant +12v psu fan mod
    Samsung SyncMaster 753DF 17" uber-flat monitor

  3. #3
    Joined
    Apr 2003
    Location
    Indonesia
    Posts
    44
    Originally posted by rth on 01-21-2004 at 05:51 AM
    mine goes 215 @ 11-3-3-2.5 and 200 @ 11-3-2-2.0, at default 2.6V. "11" works well on my board, you could go with lower if you want. get a 512M stick of Buffalo pc3200 Ch5 for $73 at Newegg and you will get a true value
    What's you have CH5 or Ch6?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •