Page 2 of 23 FirstFirst 12345612 ... LastLast
Results 16 to 30 of 335
  1. #16
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893
    Originally posted by RW2112 on 01-28-2004 at 11:24 PM
    AQXEA 0350 2500+ 208 X 11 with 1.75V... Can't stay stable any higher no matter how much voltage I throw at it.

    have you tried lowering the multi to like 10 or so

    i am prime stable at 242 X 9
    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

  2. #17
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893

    Latest update

    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

  3. #18
    Joined
    May 2003
    Posts
    822
    what voltage and cooling you using there ?
    InfinityNFII|Niuhb1800@240x10.5@1.850v|Slk800+TTsfII|Radeon98oo~405/365|MushkinLevelII256x2|WD800JB|LiteOn48x24x48|
    Pioneer106sDvd|LogitechZ640's|NecFe700+|n'aBIG old azz real maple desk(refinished by me) 3dmark2oo1SE(GotMy20k !)

  4. #19
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893
    2.0
    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

  5. #20
    Joined
    Jun 2001
    Location
    Houston
    Posts
    80
    Cooling???

  6. #21
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893
    water
    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

  7. #22
    Joined
    May 2003
    Posts
    822
    allrighty then ..
    InfinityNFII|Niuhb1800@240x10.5@1.850v|Slk800+TTsfII|Radeon98oo~405/365|MushkinLevelII256x2|WD800JB|LiteOn48x24x48|
    Pioneer106sDvd|LogitechZ640's|NecFe700+|n'aBIG old azz real maple desk(refinished by me) 3dmark2oo1SE(GotMy20k !)

  8. #23
    Joined
    Jun 2001
    Location
    Houston
    Posts
    80
    I got my 2400 yesterday and here is what im currently at





    On an NF7-S with SLK900A with 80mm tornado. Previous to this it was stable at 2 ghz on 1.45v and 2.2ghz at 1.6v and 2.4ghz at 1.8v.

  9. #24
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893
    nice


    from what i heard most of these chips avg around 2.4
    so 2.5 is really good
    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

  10. #25
    Joined
    Dec 2003
    Posts
    467

    Cool can I do better ?

    Win2kPro
    A7N8X Dlx 2.0 Uber Bios 1007
    Mobile 2400 12x200 1.8V Agressive Vantec Aeroflow 47C Load
    2x256 Apacer Infineon + 1x512 Apacer Samsung 7-3-3-3 2.7V
    WD 40GB 7200 Rpm 8Mb Cache "Caviar Special Edition"
    Powercolor 9700 Pro @351/330 Agp Bus 69Mhz (stock/no cooling)
    Generic Floppy/Generic 50X Cdrom
    Optorite DD0201 DVD+/- RW Combo Drive
    RaidMax Scorpio Case/RaidMax 420W pwr supply/stock fans
    (1 side intake, 2 rear exhaust)
    Used rounded cables, and cleaned it up best I can.

    Advice on the following pls :
    In a few days (waiting on NewEgg) I am getting WinXpPro, and a Leadtek TV Card, am I going to have to "throttle back" on my ram timings even more to maintain stability ? (I used to run 5-5-5-2.5, had to loosen when I put in the 512 stick.

    I have tried messing with every setting that applies, took a day and a half doing it, I cannot get my CPU to fold or Prime95 stable at any configuration that equals more than 2.4Ghz. Is there anything left, or is the CPU at its limit ? (If CPU at limit, then I dont really need better RAM, I care about clock cycles, not my FSB)

    On a whim, I bumped my AGP bus from 66 to 69mhz, the AGP window from 128 to 256, and my 3dMark 03 scores went up about 300pts, and the 01 scores went up ALOT. Should I try bumping AGP bus up further ?

    Chewie

    P.S. - all opinions welcome, but it you are going to tell me something stinks, tell me WHY so I can tweak!
    Last edited by ChewieFL2003; 02-01-2004 at 05:46 PM.
    HAF 922 -MSI Z68A GD65 G3 - i2600K 100.00 X 38 = 3.8Ghz
    2 x 4Gb Corsair CMZ8GX3M2A1600C8 8-8-8-24-2T 1600 Mhz Windows 7 Professional 64 bit
    2 x MSI 670 GTX PE - Card 1 1228 Core 3005 Mem, Card 2 1189 Core 3005 Mem
    Intel Controller -1 x Samsung 830 240Gb SSD (Boot/OS/Stuff) + 2 500Gb Caviar Black + Marvell - SATA DVD all single drive AHCI mode
    XFX Black Edition 850W Hottest Core IBT 66c, Prime 62c

  11. #26
    Joined
    Sep 2003
    Location
    Bedford, England
    Age
    31
    Posts
    10,213
    going over 66mhz can damage your agp, i dont recommend it one bit, have you tried higher voltage on your cpu?
    rick

  12. #27
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893
    i too would not reccomend Increasing the bus of AGP it will damage your Video card

    also the AGP Aperture is supposed to be half the amount of the total memory availabe in your system for optimal performance..someone correct me if i am wrong
    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

  13. #28
    Joined
    Dec 2003
    Posts
    467
    I dont know. I will reboot now, change AGP bus back to 66, and run 3dmark again. I will re-post with results.


    Chewie
    HAF 922 -MSI Z68A GD65 G3 - i2600K 100.00 X 38 = 3.8Ghz
    2 x 4Gb Corsair CMZ8GX3M2A1600C8 8-8-8-24-2T 1600 Mhz Windows 7 Professional 64 bit
    2 x MSI 670 GTX PE - Card 1 1228 Core 3005 Mem, Card 2 1189 Core 3005 Mem
    Intel Controller -1 x Samsung 830 240Gb SSD (Boot/OS/Stuff) + 2 500Gb Caviar Black + Marvell - SATA DVD all single drive AHCI mode
    XFX Black Edition 850W Hottest Core IBT 66c, Prime 62c

  14. #29
    Joined
    Aug 2002
    Location
    LoSt In bLaCk HoLe
    Posts
    1,159
    I just order my 2400+ Mobile!!! Hope to get a good one, should be here Thur. morning. What do you guys think the max is on these with a SLK-947 and a Datech 92mm (95cfm) ?

    Intel DC e2160 @ 3.15ghz 9x350mhz@1.50v| Gigabyte P35-DS3L| Gskill PC6400 2GB 5-5-5-15 840mhz @ 2.0v|AC 7 cooler| Corsair 620w| Seagate 250GB 7200/SATA3| TBD| Lite on 16x DVD-ROM| Lite on 16x DVD-RW | SB-Live Value| PNY 8800GT 512mb 710mhz/1800mhz/2000mhz| Cable Modem 8.0mb/768kb | Acer 20"WS 1680x1050|

  15. #30
    Joined
    Mar 2003
    Location
    NY
    Posts
    1,893
    i would say the avg seen is around 2.4Ghz
    bt some tend to go higher

    mine is stable at 2.59 235 X 11 @2.0V watercooled
    SYSTEM 1//
    DFI UT 250GB//A64 Mobile 3000+ 1MB cache// 280 X 9// Crucial Ballistix Tracer 1GB @ 252 FSB @7-3-3-2.5//ATI X800XT PE 550/560 //2 X 36GB Raptors, 160GB Sammy Data Drive//Audigy ZS Sound card
    Watercooled....Powered by Fortron 530Watt//23K 3DM01
    SYSTEM 2//
    EPoX 9NDA3J// A64 3000 Venice 300 X 9 @1.45V// KingMax SuperRam 3700 @ 250FSB //512MBX2 @7-3-3-2.5 @ 2.8V//ATI 9800Pro//Audigy2 ZS//Hitachi 80GB SATAII//Maxtor 250GB Data Drive//Zalman Air cooled...Powered by OCZ 450 Modstream
    Heatware

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •