Page 4 of 8 FirstFirst 12345678 LastLast
Results 46 to 60 of 116
  1. #46
    Joined
    Mar 2003
    Posts
    26

    Smile

    Well, I guess I should be happy. I was running a 2800+ barton at 210X11 on my A7N8X-Dlx. I am running now a 2500+ mobile stepping IQXFA 0348XPMW at 205X12.5=2.568 ghz @1.825 vcore (mbm is reporting 1.89?). I was hoping for something better... I am running it on water with a whitewater and a huge 6"X9" heatercore with 2 120mm fans blowing in. I am using the uber 1007 bios, but for some reason I can't bump up the vcore anymore than what it is at now. Any suggestions? Thanks!
    I poop poop and I eat eat potatoes

  2. #47
    Joined
    Oct 2003
    Location
    France
    Age
    35
    Posts
    63
    hello

    I seek of the 2400/2500+ mobile IQZFA/IQYFA/IQXFA..
    are this somebody sell to it his? not possible in finding in France if you know or be what I can buy one ...

    thank
    Max o/c

    Xp 1800+ AIRGA 0242 TPAW @1830mhz a 1.65v (air)
    Xp 1800+ JIUHB 0304 XPFW @2302mhz a 2.2v (air)
    Xp 1800+ JIUHB 0311 VPMW @2400mhz a 1.75v (air)
    Xp 1800+ JIUHB 0309 TPMW @2567mhz a 1.875v (water)
    Xp 2100+ AIUHB 0308 SPHW @2450Mhz a 1.95v (air)
    Xp 2500+ AQUCA 0311 XPCW @2400mhz a 2.2v (water)
    Xp 2500+ AQXEA 0331 UPMW @2591mhz a 2.25v (water)
    Xp 2500+ AQXFA 0334 RPMW @2687mhz a 2.1v (water)
    Xp 2500+ AQZEA 0351 UPMW @2400mhz a 1.8v (water)
    Xp 2500+ PQZFA 0347 MPMW @2250Mhz A 1.8v (water)
    Duron 1.6 MIXHB 0334 VPMW @2535Mhz a 2v (water)
    Duron 1.6 MIUHB 0338 SPMW @2420mhz a 1.875v (water)

  3. #48
    Joined
    Jan 2003
    Location
    San Diego, CA
    Age
    47
    Posts
    2,069
    Sorry guys....couldn't get the processor in the box last night. The wife didn't go work out (happens EVERY time we eat before she is to go to the gym). Tonight she has a doctors appointment so it should be prime time for me to drop that sucker in.

    Sure looks purty though...

    (the processor AND my wife that is)

    "AAaaaaarrrrrrrrrrrrrggggggghhhhhhhhh!!!!"
    - Sen. Howard "Chucky" Dean (New Wack-Job Chairman of the DNC)
    "Those who survived the San Francisco earthquake said, 'Thank God, I'm still alive.' But, of course, those who died, their lives will never be the same again."
    - Sen. Barbara Boxer (Ultra Socialist Twit from CA)

  4. #49
    Joined
    Jan 2004
    Age
    43
    Posts
    527
    FrizzleFried, you're a sneak, man. :-) It's like cheating. I just ordered a 2400+ while my wife's at home ordering plane tickets to Florida.

    She won't know till the CC bill comes in. I won't feel so bad since it'll be next to the plane tickets :-)

  5. #50
    Joined
    Dec 2003
    Location
    Maine
    Age
    35
    Posts
    415
    I ordered a mobile 2500+ from newegg today. Hopefully can get some good results from it. I had an AQXEA0334 which died, but i hit 238FSB on it stable. Im setting up watercooling right now too. I also have an AQXEA0331 on the way to me, i wonder which chip will overclock better?

  6. #51
    Joined
    Jun 2001
    Location
    NY
    Posts
    465
    I get my brother to order it and pay him cash so there is no evidence........my computer is always in pieces so she dont know what the hell is going on, plus theres graphics cards, fans, drives, cpu's, wires all over my desk I cant even keep track of the stuff here so theres no way she will ever know.........muahahahaha
    A64 Newcastle
    Gigabyte K8NS pro
    Elsa x800pro VIVO modded to X800XT
    24/7 clocks (600/1180) benching clocks(630/1230)
    2x256mb corsair twinmos pc3200LLPT V1.1@235mhz@3.3v@2,2,2,6,11,16 1T
    Enermax465P-VE FM 460w
    6948/x800pro@xt@626/1216 3dmark05
    14,643/x800pro@xt@630/1230 3dmark03
    30,281/x800pro@xt@625/1230 2k1
    21,447 9800pro@450/350
    17,156 on a original ti4200(3dmark2k1)
    16,085/9600xt@617/345 3dmark2k1

  7. #52
    Joined
    Jun 2001
    Location
    NY
    Posts
    465
    Originally posted by FrizzleFried on 02-18-2004 at 11:39 AM
    Sorry guys....couldn't get the processor in the box last night. The wife didn't go work out (happens EVERY time we eat before she is to go to the gym). Tonight she has a doctors appointment so it should be prime time for me to drop that sucker in.

    Sure looks purty though...

    (the processor AND my wife that is)
    doctors appointment at night?? sounds fishy, If I was you Id keep a better eye on her.......seems like she goes out a lot at night
    A64 Newcastle
    Gigabyte K8NS pro
    Elsa x800pro VIVO modded to X800XT
    24/7 clocks (600/1180) benching clocks(630/1230)
    2x256mb corsair twinmos pc3200LLPT V1.1@235mhz@3.3v@2,2,2,6,11,16 1T
    Enermax465P-VE FM 460w
    6948/x800pro@xt@626/1216 3dmark05
    14,643/x800pro@xt@630/1230 3dmark03
    30,281/x800pro@xt@625/1230 2k1
    21,447 9800pro@450/350
    17,156 on a original ti4200(3dmark2k1)
    16,085/9600xt@617/345 3dmark2k1

  8. #53
    Joined
    Jan 2004
    Age
    43
    Posts
    527
    sixteenDOHC, 1st sys in sig, same stepping, overclocks like a dream. I've kept it mild so far. Hit 223fsb (limit by mem) x 11, but backed it down to 223x10.5 for 24/7 @ 1.775 (1.85 for prime). My mobo undervolts a freak'n lot though.

  9. #54
    Joined
    Jan 2003
    Location
    San Diego, CA
    Age
    47
    Posts
    2,069
    FrizzleFried, you're a sneak, man. :-) It's like cheating. I just ordered a 2400+ while my wife's at home ordering plane tickets to Florida.

    She won't know till the CC bill comes in. I won't feel so bad since it'll be next to the plane tickets :-)
    Hehe...luckily I do the finances too! Hehe...I will eventually tell her. I can't lie to my wife. But not telling her something ISN'T the same as lying....unless she asks!

    doctors appointment at night?? sounds fishy, If I was you Id keep a better eye on her.......seems like she goes out a lot at night
    Chiropractor appointment. Every Wednesday at 5:30pm after work...unfortunately it only takes about 10-15 minutes so I will have to work fast....but you see, all I have to do is get the old one out and put away before she comes home. She couldn't tell the difference between an XP2500 Barton and an old Pally let alone a tBred...

    "AAaaaaarrrrrrrrrrrrrggggggghhhhhhhhh!!!!"
    - Sen. Howard "Chucky" Dean (New Wack-Job Chairman of the DNC)
    "Those who survived the San Francisco earthquake said, 'Thank God, I'm still alive.' But, of course, those who died, their lives will never be the same again."
    - Sen. Barbara Boxer (Ultra Socialist Twit from CA)

  10. #55
    Joined
    Jun 2001
    Location
    NY
    Posts
    465
    I was just messing with ya dude lol
    A64 Newcastle
    Gigabyte K8NS pro
    Elsa x800pro VIVO modded to X800XT
    24/7 clocks (600/1180) benching clocks(630/1230)
    2x256mb corsair twinmos pc3200LLPT V1.1@235mhz@3.3v@2,2,2,6,11,16 1T
    Enermax465P-VE FM 460w
    6948/x800pro@xt@626/1216 3dmark05
    14,643/x800pro@xt@630/1230 3dmark03
    30,281/x800pro@xt@625/1230 2k1
    21,447 9800pro@450/350
    17,156 on a original ti4200(3dmark2k1)
    16,085/9600xt@617/345 3dmark2k1

  11. #56
    Joined
    Jan 2003
    Location
    San Diego, CA
    Age
    47
    Posts
    2,069
    I was just messing with ya dude lol
    ...i know...

    <grin>

    "AAaaaaarrrrrrrrrrrrrggggggghhhhhhhhh!!!!"
    - Sen. Howard "Chucky" Dean (New Wack-Job Chairman of the DNC)
    "Those who survived the San Francisco earthquake said, 'Thank God, I'm still alive.' But, of course, those who died, their lives will never be the same again."
    - Sen. Barbara Boxer (Ultra Socialist Twit from CA)

  12. #57
    Joined
    Mar 2001
    Location
    Pittsburgh, Pa.
    Posts
    1,407
    Got my 2500 today from Newegg today IQYFA 0343 Hopefully get it in and fired up but have to wire new case to MB pins after as everything is brand new

  13. #58
    Joined
    Jan 2004
    Location
    East Coast USA
    Age
    49
    Posts
    16
    Just got mine from Newegg as well. It's a IQXFA 0348, i'll slap it in later on tonight and post some results.

  14. #59
    Joined
    Jan 2002
    Location
    columbus oh
    Posts
    412
    I made the jump too......Just received my 2400...

    IQYHA 0346

    Currently doing 220 x 11.5 or 2535.9 @ 1.87v

    Loving watercooling cause she's been doing prime for about an hour and load is at 32c!
    BenT

    DFI Lanparty NF4 UT
    2x512 GSKILL 2.5-3-3-6 1T @290
    AMD64 3200 @ 2.9 1.60v
    custom water rig
    2x Maxtor 300gig 16meg cache
    ATI X850XT
    Win XP
    30c idle / 35c load

  15. #60
    Joined
    Sep 2002
    Location
    Michigan
    Posts
    271
    i just got in my mobile 2400+ from newegg.

    IQYHA 0346

    i am running 200x12=2400mhz @ 1.950V prime95 stable.
    it runs fine 2500mhz @ about 2v but i cant get it "prime95" stable there. might be that my abit KV7 is not the best overclocking board...
    Abit KN8 Ultra | Venice 3000+@ 250x9 | Thermaltake Typhoon | 4x 512mb Corsair | evga 7600 GT | 2x 36 gb Raptor | 80gb and 250 gb storage drives | NEC 16x DVD+/-R | Lite-on 16x DVD+/-R | Cooler Master case w/ 470w enermax noisetaker | Win XP Pro

    heat: drsaari

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •