Results 1 to 10 of 10
  1. #1
    Joined
    Sep 2003
    Location
    Los Angeles (Lakers!)
    Age
    37
    Posts
    56

    Best HSF for mobile 2500+ @ 2.4GHz

    I've got a 2500+M here, the ones that are supposed to overclock like crazy. I'm wondering what the best HSF is for a 2500+M that'll probably be operating at at least 2.4GHz and probably more like 2.6GHz at 1.9V. I assume 1.9V is relatively safe?

    If you could, could you list your top 3 HSFs for this type of clock speed? If not, that's fine. Thanks.
    Space for Rent

    Please PM me first, and then email me at dhlbruin@ucla.edu

  2. #2
    Joined
    Mar 2003
    Location
    UK
    Posts
    1,238
    Thermalright SP97 (heatpipe technology) with a PAPST 92mm and Arctic Silver 5 -without a doubt - though expensive

    I'm gonna get one myself if my overclocking takes my temps any higher - currently 62C (22C above ambient) for a XP2600 (1.65V) @ XP3700/2500MHZ (1.85V)

    Don't think it will survive a hot summer...
    Last edited by dnd; 03-08-2004 at 11:17 AM.

    FX-55, 2GB, 8800GTX (650/1000MHz) @ 1600x1200 NATIVE
    3WARE PCIE 9650SE-2LP --> RAPTOR 150GBx2/RAID0

  3. #3
    Joined
    Nov 2003
    Location
    Hizome.
    Age
    35
    Posts
    7,995
    at those temps...DEFINITELY not

  4. #4
    Joined
    Sep 2003
    Location
    I am everywhere.
    Age
    46
    Posts
    450
    SP97 and a high cfm, 92 mm fan, which is going to be painfully loud, but 1.9V requires it. My 60cfm, 92mm fan barely keeps up with 1.75V @12 x 200 on warmer days.

    Your temps will be VERY dependent on your ambient temperature, even with the best heatsink.
    Abit NF7 2.0/Nforce2 v3.13
    Mobile 2600+ @ 2.76ghz/1.91V
    Thermalright SP97 heatsink w/ Enermax 90mm
    2 x 512 PC3200 Mushkin 222 Special @ 11-2-2-2/2.9V
    BFG 6800 GT @ 430/1.14 // Soundblaster Audigy 2
    WD 40 GB, 8MB // LiteOn CDRW
    Antec SX635BII case // Antec Truepower 480
    Vantec Nexus 3.5" Fan Controller // 5 x 80mm case fans
    Win2KPro SP4
    3D'03 : 12,807
    http://service.futuremark.com/compare?2k3=2829028

  5. #5
    Joined
    Jan 2004
    Posts
    40
    SP97 with Vantec Tornado 92mm (if u don't mind the noise)
    SP97 with Vantec Steath 92mm (quieter)

    if u want something cheaper:
    SLK947 with Vantec Tornado or Steath

  6. #6
    Joined
    Jan 2004
    Location
    Michigan
    Age
    52
    Posts
    541
    if you are planing on running that high of a vCore, to save your sanity and hearing, you may want to think about water cooling...
    you will need something like a tornado to cool it with air....

  7. #7
    Joined
    Sep 2003
    Location
    I am everywhere.
    Age
    46
    Posts
    450
    Originally posted by virus2 on 03-08-2004 at 04:08 PM
    SP97 with Vantec Tornado 92mm (if u don't mind the noise)
    SP97 with Vantec Steath 92mm (quieter)

    if u want something cheaper:
    SLK947 with Vantec Tornado or Steath
    A Vantec Stealth will do nothing running 1.9V. You need a 90cfm+ fan.
    Abit NF7 2.0/Nforce2 v3.13
    Mobile 2600+ @ 2.76ghz/1.91V
    Thermalright SP97 heatsink w/ Enermax 90mm
    2 x 512 PC3200 Mushkin 222 Special @ 11-2-2-2/2.9V
    BFG 6800 GT @ 430/1.14 // Soundblaster Audigy 2
    WD 40 GB, 8MB // LiteOn CDRW
    Antec SX635BII case // Antec Truepower 480
    Vantec Nexus 3.5" Fan Controller // 5 x 80mm case fans
    Win2KPro SP4
    3D'03 : 12,807
    http://service.futuremark.com/compare?2k3=2829028

  8. #8
    Joined
    Sep 2003
    Location
    Los Angeles (Lakers!)
    Age
    37
    Posts
    56
    Quick question; what should my temps be under full load at 2.5GHz 1.85V with an SLK947U and Vantac Tornado 92mm? With an ABIT NF7-S is 53C OK? Though I know it is a few C lower than that since ABIT reports higher temps most of the time.
    Space for Rent

    Please PM me first, and then email me at dhlbruin@ucla.edu

  9. #9
    Joined
    Jul 2003
    Posts
    246
    Originally posted by djspl on 03-09-2004 at 02:01 AM
    You need a 90cfm+ fan.
    I don't think so. I'm running 45C max load with the config in my sig, 49C max load at 200x13.5 @ 2.0V (20-22C ambient) - SP97/ 92mm Panaflo U1A.
    DFI LANParty UT NF4 Ultra-D
    Opteron 165 @ ~2.6GHz (288x9 stock Vcore)
    SI-120/ Sanyo-Denki 120mm
    2GB G.Skill HZ @ 259MHz 3-4-4-8
    X850XT
    Raptors/ Plextor Premium/ NEC DVD-RW
    TB Santa Cruz/ Swan M200/ Dayton sub
    PowerSteam 600/ Lian-LI PC75
    24+ hours dual Prime stable (priority 10)

  10. #10
    Joined
    Apr 2002
    Location
    Earth
    Posts
    1,047
    i want to change my AX-7 to SP97 but not right now because im getting 28idle at 220*11.5 @1.65v.

    -3dmark2k1 = 15153
    -Idle:23 || Load:63 || Shutdown: Priceless
    -

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •