Need help figuring out what I have damaged
I did something real stupid yesterday. I got my New turbo cool psu with the external pot on my 3.3v line yesterday. I was booted into windows, I had not mounted the pot on anything yet, so it was dangling outside my case. I moved the case a little and Whamo! frickin thing grounded out on my case!!!
I reset the psu, and my system hasn't been the same since, it acts like something got damaged on the southbridge. It will lock up loading windows, and a reset does nothing. I have to turn it off then the bios usuallly will lock. I prime95 ok, but I left it on last night and was greeted by a no signal monitor, and one led light on the frontx thing, I think it was #3 that was lit. Had to turn off then back on twice, to get back up.
The pot is on the 3.3v line. Anyone have any ideas as to what I damaged???? Is the psu ok? Since it prime95 ok, I am assuming the cpu/memory is ok, but what about the video card? I do have an extra board I can put in.. and I am pretty sure the board is what got hurt, but I need help making sure...
Thanks in advance
DFI LP NF2 UltraB
Barton M 2500+
250.57 X 11 (2756Mhz) P95 Stable
Mushkin PC3500 Dual Ch 2 X 256 Lvl2 bh5
PC Power and Cooling 510 Deluxe PSU
Vcore 1.9v, Vdimm 3.30v, Vdd 1.80v, AGP 1.50v
CPU Diode -23C No Load 1C Full Load
Case 34C Idle 40C Full Load
Socket 16C Idle 35C Full Load
Microcool Mosfet Chipsinks
ATI 9800 Pro W/ Artic Cooling VGA Silencer
Raptor 36Gb SATA Non Raid Channel 0