Results 1 to 4 of 4
  1. #1
    Joined
    Feb 2004
    Posts
    43

    overclocking 2500

    i went in my bios and seen were i could change it form a 2500 to a 3200 or to a user defined i was wondering if i change it will it automatically run at 3200 speeds also i am running the stock hfn
    FIRST BUILD:
    n7-m mobo
    2500 barton
    maxtor 80 gig hd
    2x256mb kingston pc2700
    pioneer 4x dvd burner
    artec dvd rom
    axio case w/side window 2 fans
    480 w psu

    AIM: COMPNOOBY

  2. #2
    Joined
    Nov 2003
    Location
    Hizome.
    Age
    35
    Posts
    7,995
    Give it a try.
    Just watch temps carefully while your doing it...IF you need to increase VCore, its not always needed.

  3. #3
    Joined
    Mar 2004
    Location
    mtl,canada
    Age
    41
    Posts
    37,286
    use speedfan,if ur load t is like 55celsius don't go further.
    optimal would be 50 and below,but a bit over won't kill it.

    add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
    responsibility, which i dont hold if u break anything

    GRAB here OcBible v1.55 and Guidemania v1.21
    scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
    of no board
    http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
    IN MEMORY OF HOW BM WAS TREATED HERE...

  4. #4
    Joined
    Feb 2004
    Location
    australia
    Age
    38
    Posts
    9
    Yeah 55 should be fine, 60 underload but im always a little fussy when it comes to temps i like it to be around 45 underload.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •