Abit NF7 Modded Bios's

[Shroomalistic]

I cant add anymore to the first post, so Ill start a new post for the newely released ones

TICTAC Bios's Cont..
D23 3D-FIRE Reversion 2
Features:
- Base on D23 bios structure
- ROMSIP Table Re-tune (Multiplier Working)
- Vcore Revised : 0.025V increasement
- Overclockers bios layout
- BPL Version 3.02 (ABIT Original PCR Register) /BPL 3.19(CPC disable)
- Command Per Clock Enable/Disable
- L12 mod Build in
- 3D Fire Ingredients
- SATA Bios Version 4247
Download Link:
- Command Per Clock Enable
http://downloads.modlabs.net/bios/be...3D-R2-4247.zip
- Command Per Clock Disable
http://downloads.modlabs.net/bios/be...-3D-R2-CPC.zip

Added 6/25/2004
Trats Bios's Cont..

the d14s and d24s have:
- 200fsb tables from infinity 12-10, 12-31, 1-31 or 4-29
- original d14-bpl or d24-bpl, nvidia 319bpl (cpc on) or cpc off (infinity bpl)
- L12 mod built-in

cpc on bioses
d24 sata 4247 with infinity 1231
d24 sata 4247 with infinity 429 and nvidia 319bpl (cpc on)
d24 sata 4247 with infinity 131 + 429 and d14-bpl
d14 sata 4247 with infinity 1210
d14 sata 4247 with infinity 1231
d14 sata 4247 with infinity 131
d14 sata 4247 with infinity 429

cpc off bioses
d24 sata 4247 with infinity 1231 and cpc off
d24 sata 4247 with infinity 429 and cpc off
d24 sata 4247 with infinity 131 + 429 and cpc off

[tip_vortex]

what is the difference between CPC enable and CPC disable?

[waiho2k1]

what is the difference between CPC enable and CPC disable?

diabling the CPC let you to have higher FSB

[tip_vortex]

then are there any disadvantages or minus point to use CPC disable bios?

will i lose performance? ram performance or something?

[THunDA]

then are there any disadvantages or minus point to use CPC disable bios?

will i lose performance? ram performance or something?

Read that big thread in this forum named " COMMAND PER CLOCK : details inside..." and you will learn everything you need to know about it..

[cartmanea]

Disabling CPC is only needed for double-sided 512Mb ram modules. If you have 2 256Mb sticks, then don't worry about it.

[BCC|Zeus]

[QUOTE=Shroomalistic]
D23 3D-FIRE Reversion 2
Features:
- Base on D23 bios structure
- ROMSIP Table Re-tune (Multiplier Working)
- Vcore Revised : 0.025V increasement
- Overclockers bios layout
- BPL Version 3.02 (ABIT Original PCR Register) /BPL 3.19(CPC disable)
- Command Per Clock Enable/Disable
- L12 mod Build in
- 3D Fire Ingredients
- SATA Bios Version 4247 [/QUOTE=Shroomalistic]

Is this a stable SATA BIOS? I run a RAID 0 setup, and I don't want to corrupt my data. Any people have good luck overclocking with this BIOS? How's memory bandwidth?

[cartmanea]

Don't run Raid 0 off the onboard controller if you are worried about losing your data. I'm running Raid 1 off it, just because I DO NOT want to lose my stuff.

[Rabbi]

Is this a stable SATA BIOS? I run a RAID 0 setup, and I don't want to corrupt my data. Any people have good luck overclocking with this BIOS? How's memory bandwidth?

i run it with SATA RAID0
check my sig for specs

[cartmanea]

Well Rabbi, you are one of the few people who are confident with thoir Raid 0 setup. From what I've read you went through a lot of effort to find the bios and driver combinations that would be stable. Do you have your data backed up too?

[BCC|Zeus]

I've been running a SATA Raid 0 setup on an A7N8X Deluxe since Sept. 2003 with no problems. I hope it runs fine on the NF7-S I have now. If it doesn't its not because the SI3112 controller is bad, it's because ABIT's implementation of it is. . .

[Rabbi]

cartmanea,
from what ive gathered the Post-D14 BIOSes don't have an issue with SATA RAID Corruption... but I could be mistaken.
I have always run SATA BIOS 4247 and RAID Driver 10040, i didnt have to experiment with any others because these have been flawless for me.
I do have a 60GB PATA drive with a backup of all my important stuff tho, and i hav a pile of CDs too... jus incase

[cartmanea]

Well, I am using two 80Gb drives and I don't need 160 Gb so I'm using Raid 1 for the data security of it. I'm not too concerned about the enhanced performance of Raid 0 right now. At least not until I get a pair of Raptors

[waiho2k1]

Right now using 2 7K250 80GB in SATA RAID0, no problem with the d24 bioses + 1.00.50 driver

[pirateike]

What do these modded BIOS's do? You have each version listed and linked to, but I have no idea what the differences are between them or what they do differently than the normal BIOS.