HTT of 2 sticks of TCCD

[mad andy]

1 t command makes a hell of a difference with the a64 more so than the actual bandwidth because the controller is " on chip".....latency is the name of the game here and selling me ram that only runs at 2t isn't what i was after..now are you running at 1t or 2t because i reiterate that this ram will not do 1t command over 198mhz...now i do believe that one stick could be a bit suspect....but both sticks behaving the same?
I am waiting for corsair to open on monday and to see what they said...but after seeing Ram Man suggesting a 2t commad...well...you dont have to be sherlock holmes

[mad andy]

i can run sisoft at 1t
but can you run prime...or memtest? or 3d mark2001

i doubt it very much...this is the benchmark of stability not si soft sandra.

[mad andy]

Project Comparison
The project id is not valid - it is possible that this project has not been published. Please check the URL.

[StanRoman]

I just realised stan youre the guy who was giving me the crap....well i'll be fecked.'

There's ALOT of things you don't realize. Such as me not getting into arguments or childish "you said, I said" type of garbage. I don't argue bro. I make my point or let you know what I think or how I see it and that's it. You're more than welcome to keep at it though..

I will answer what you asked above..I can't make it any more simpler or put it more plainly bro..that IS 1T. Why would I run 2T? Do you happen to know of any ram or anyone that has gotten a score on Sandra of 7400+ at 2T and 265mhz? How else do I have to put it or explain it my man?

[StanRoman]

Some funny shit..why is there an icon of "show desktop" in your..Desktop? That's just classic.

[mad andy]

Stan....if thats all you can come up with...taking the piss out of my desktop???
show me an everest readout and a screen shot of a few runs of memtest at 1t....its quite an easy thing to do..if you need information of how to do it just ask.all i have seen is you running the ram at 2t...i even had to inform you that it was running at 2t on your own screenshot



you are a fool and a hoaxer and you are wasting my time...

[StanRoman]

Stan....if thats all you can come up with...taking the piss out of my desktop???
show me an everest readout and a screen shot of a few runs of memtest at 1t....its quite an easy thing to do..if you need information of how to do it just ask.all i have seen is you running the ram at 2t...i even had to inform you that it was running at 2t on your own screenshot



you are a fool and a hoaxer and you are wasting my time...

Ok. Sorry.

[mad andy]

as wired said in the house of help...lets chill out..

i understand you rma'd a couple of sticks of this also...you live in the uk?

[StanRoman]

as wired said in the house of help...lets chill out..

i understand you rma'd a couple of sticks of this also...you live in the uk?

I RMA'd 1 kit of 2x512 because the first one gave errors on Memtest86+ and they wouldn't go past 250mhz. The new kit is great and I have had exactly 6 1GB kits sitting here at home of TCCDs: Patriot, G.Skill, OCZ (2 sets of these.. 1 kit of 2x512 PC3200 Plat. Rev2 and 1 kit of 2x512 PC4200 EL Plat.) and 2 kits of 2x512 Corsair PC4400C25.

Sold the Patriot and the other set of Corsair PC4400C25. Now..the OCZ PC4400 EL Plats. I rma'd 3 times and finally got a good kit and after testing and trying all of the ram above, the Corsair and G.Skill LEs are the best ones (both Corsair kits did 270mhz as well as the G.Skill LEs. My memory controller tops out at 270mhz). The best overclocking one of them all is the OCZ PC3200 Platinum Rev.2 which goes to 255-260mhz and it's only rated at PC3200.

All of them were tested at 2.5-3-3-10 with 2.55v-2.60v (most TCCD, at least the newer ones, like lower voltages) and ALWAYS at 1T. I don't BS with 2T crap since it's worthless and just good for bragging about going as high as 290-300mhz. They all gave errors with 2.8v and above.

[mad andy]

i believe i may have a set of old tccd...they will not work at 1t and they prefer 2.8v...i was under the understanding that the tccd was not a voltage lover and i was sticking at 2.5 - 2.65 over the first couple of days.

i remember rma'ing 2 sets of ocz pc3500el dual channel a while back and i ended up with a third set that was just about passable..

http://www.houseofhelp.com/forums/sh...013#post175013

looks like my original post stands..

1t is impossible so the ram has to take a hike..

so in the end we where both right..

funny old world

[mad andy]

from the guy who bought my bh-5's

Dear thaibog,

Hello Andrew, straight in @ 275Mhz running 2.5-3-3-8 1:1 with cpu ( 3.5v ) upping my 1800Mhz Athlon64 3000 into a 2475Mhz FX53 ( 2400Mhz ) beater!!! Wicked !!Many thanks Lee.



i wish my ddr booster worked with the enermax 600w noisetaker...