Results 1 to 4 of 4
  1. #1
    Joined
    Apr 2003
    Location
    51st State
    Posts
    417

    9nda3+ out of the box SD/venice support?

    basically as title, does the 9nda3+ work with san diego and venice processors out of the box? If not then what bios/ setup do you advise I use to flash the board so it will work with these processors (i had to do the same thing with my msi k8n neo2)

  2. #2
    Joined
    Jan 2003
    Location
    Florida
    Age
    62
    Posts
    132

    Re: 9nda3+ out of the box SD/venice support?

    The 4-1-05 bios recognises the E stepping cores. The Epox Magic Bios utility worked fine for me.
    no sig required.

  3. #3
    Joined
    Aug 2001
    Age
    50
    Posts
    987

    Re: 9nda3+ out of the box SD/venice support?

    It should work but may not recognize it properly. It will depend on the pack date of the mobo and what BIOS was installed at that time.

    Asus M2N-SLI Deluxe - AMD Opteron 1212 HE @ 3.0GHz - 2 x 1GB Corsair XMS2 PC6400C4 @ 1000MHz 5-5-5-15 -
    BFG 7950GT OC @ 600/1600 - 160GB Seagate SATA2 - 3 x 300GB Seagate SATA1 - Enermax Whisper II 535w
    Heatware

  4. #4
    Joined
    Feb 2004
    Location
    Fenton, Mo.
    Age
    69
    Posts
    197

    Re: 9nda3+ out of the box SD/venice support?

    Unless the supplier had the board sitting around for quite a while it should recognize either processor right out of the box. I got mine a couple of months ago and had no problem with my Venice 3000. If you want a good starting setup look in the Soyo Fourm, Soyo Lounge/bar page 29 and a little past half way down the page Electric Bill posted the settings and they worked great for me except I had to start the htt at 230 till I burned the system in for a couple of weeks then I was able to start tweaking it.
    Doug


    Asrock Z77 Extreme 4
    I5 3570K @4200
    Corsair H60 Cooler
    2x4 GB Kingston Hyperx Blue
    WD 80GB, Samsung Spinpoint F3, Samsung 830 120GB SSD
    HIS Radeon HD 6770
    LG HSN 10 18x DVD RW x2
    Window 7 Pro 64 bit
    Antec HGC 620M Power supply
    http://www.heatware.com/eval.php?id=30843

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •