Page 4 of 4 FirstFirst 1234
Results 46 to 48 of 48
  1. #46
    Joined
    Dec 2000
    Posts
    5,051

    Re: Can anyone help get this working?

    Well theres a couple of issues.

    First make sure the DHCP range excludes the routers ip address.

    IE, set the router to 10.0.0.1, and set the DHCP range to start at 10.0.0.2.

    The mac addres for the NIC looks like its wrong, try uninstalling the NIC driver, reboot and re-install.

    You may also need to do a "netsh int ip reset reset.txt", then reboot.

  2. #47
    Joined
    Mar 2002
    Location
    United Kingdom
    Posts
    327

    Re: Can anyone help get this working?

    I have managed to get it working now with a big thanks to the advice given.

    I went into the Bios and checked the nVidia ethernet settings. It had the nVidia Lan MAC address disabled for some reason. I enabled this and saved and exited and then went back into the Bios to check it again. It was disabled yet again. Anyone know why this keeps becoming disabled?

    So I went to the next field to enter a new MAC address, I entered the number that appears on my AGP port, there are two 12 digit hex numbers there, so I entered the first one. If you remember or look back at the pictures, the physical address was set to FF-FF-FF-FF-FF-FF for some reason. After setting and saving and exit. I went back into the Bios to check whether it was disabled again and it was. Anyway I booted windows and the yellow exclamation on my nVidia ethernet port in the tray had disappeared and I could access web pages from my browser.

    I did reconfigure the speedtouch after this to what Bryan said, setting the speedtouch address to 10.0.0.1 and the DHCP range to 10.0.0.2 to 10.0.0.254.

    Here are two more images to show the result of changing the MAC address





    So after nearly a month it is finally working Now I must work out what this hardware firewall is meant to do. Any idea what the NAT manager is meant to do? Is a hardware firewall in any way configurable or does it just do it's job without any user intervention?
    I suppose if all else fails I could read the documentation. lol

    A few details about my connection I found:

    DSL Flavour = ADSL over POTS
    Reserved Bandwidth (kbit/s) up/down = 288 / 1152

    Output Power (dBm) up/down = 11.0 / 14.0
    Attenuation (dB) up/down = 25.0 / 48.5
    Noise Margin (dB) up/down = 27.0 / 30.0

    RedDwarfer
    Last edited by RedDwarfer; 07-30-2005 at 07:56 AM.
    Intel Q9450 CPU
    Gigabyte GA-X48-DS5
    Dragon Full Tower+Corsair HX520 PSU
    OCZ Vendetta 2 with Xigmatek ACK-I7751 backplate
    6 SilenX Case Fans on T-Balancer Fan controller with Analogue sensor hub
    Gigabyte HD3850 512MB (GV-RX385512H)
    4GB OCZ Reaper HPC PC2-8500 (2x2GB)
    250GB SATA Seagate 7200.9
    500GB SATA Western Digital WD5000ABYS
    500GB SATA Western Digital WD5000YS
    Benq 1640 DVD ReWriter
    NEC 3520 DVD ReWriter
    Not connected>
    Liteon 163D DVD
    Plexor W4824TA

  3. #48
    Joined
    Dec 2000
    Posts
    5,051

    Re: Can anyone help get this working?

    As each router is a it different its best to check your documentation.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •