DFI Memory Timing Database

[Big B-man]

Okay, this thread is about your memory timing in use on your AMD-based DFI Motherboards. Any AMD CPU-based motherboard, be it a LanParty or Infinity, is to go in this database. This isn't just another OC database, although that's part of it, but a database for people to list their timings. When that's done, I'm going to put this in a categorical list by motherboard and memory. The reason for this is to make it easier for people to check out what timings people use at what speeds without having to scroll through page after page of RAM other than what they're using.

What I need from you:

1.)Specs
REQUIRED
-Motherboard (i.e. LanPartyUT NF4 Ultra-D, LanParty NF2 B)
-CPU (i.e. Athlon 64 3000+, Sempron 2800+)
-BIOS version (i.e.11/14, 704-2BTA)
-RAM brand (i.e. Corsair XMS, Crucial Ballistix) and amount (i.e. 2x512MB)
-Video card(s) (i.e. eVGA GeForce 6600LE, BFG 8800GTX)
-Power Supply (i.e. OCZ PowerStream 520, Antec TruePower TPII-550)
-CPU cooling (i.e. retail AMD cooler, Scythe Ninja, Koolance Exos, custom LN2)
Optional: hard drives, sound card, optical drives, other PCI/PCIe cards, anything else not required.

2.)BIOS settings
-Genie BIOS settings
-DRAM Configuration settings

It doesn't matter if they're set to Auto, post them.

3.)Screenshot
It must have the following:

-CPU-Z/CPUID with CPU and Memory tabs displayed
-Prime 95 (2 instances for X2s), StressPrime, or Orthos run for at least 8-12 hours (longer is fine).

3DMark or other benchmarks are nice but not required.

Since I will be creating links to your post(s), you are only allowed one motherboard and set of RAM per post.

The results list will begin in the following post. If you don't see your results linked within a few days, shoot me PM so I can link to them.

Don't worry if your RAM or motherboard isn't listed when you post; I'll edit the list as necessary for organizational purposes.
Thanks!

[Big B-man]

Socket 939
LanParty/UT NF4 Ultra-/SLI-D/R

Crucial Ballistix PC3200
Big B-man 2x512MB

Kingston HyperX PC3200
gerardjg

Mushkin XP4000
Sharptooth+ 2x1GB

OCZ EL DDR PC-4000 Gold GX XTC
barmanmyk

OCZ Platium PC3200
Radiohead 2x1GB

OCZ Platinum Elite PC4000
Zoltan 1500 2x512MB

OCZ Platinum Elite PC4800
Electric Bill 2x512MB

Patriot PC4800 +XBL
xploit 2x512MB

LanParty NF4 SLI-DR Expert

G.Skill PC3200 F1-3200DSU2-1GBLE
loonym 2x512MB

G.SKILL PC4000 F1-4000USU2-2GBHZ
PhoetuS 2x1GB

LanParty NF3 Ultra-D

LanParty/UT RD200/CFX1600/CFX3200

Socket 754
LanParty NF3 250Gb

Socket A

LanParty NFII Ultra Rev. B

[Big B-man]

My Specs:

-LanPartyUT NF4 Ultra-D, 704-2BTA BIOS
-Athlon64 3700+ (SanDiego) CCBWE
-Crucial Ballistix PC3200, 2x512MB
-PNY GeForce 7900GS 256MB@ 553/1.34
-Enermax EG565P-VE 535W
-Arctic Cooling Freezer 64 Pro
-Western Digital 60GB PATA
-Maxtor 40GB PATA
-Seagate 160GB SATA
-Pioneer 16x DVD-RW
-Samsung 52x CD-RW
-Philips Dynamic Edge 4.1
-CMD 649 PATA card

[Genie BIOS]

FSB Bus Frequency: 264
LDT/FSB Frequency Ratio: x4.0
LDT Bus Transfer Width: 16u/16d
CPU/FSB Frequency Ratio: 10.0
PCIe Frequency: 100MHz
K8 Cool' n' Quiet: Disable
CPU VID StartUp Value: StartUp

CPU VID Control: 1.300V
CPU VID Special Control: 110%
LDT Voltage: 1.30V
Chipset Voltage: 1.60V
DRAM Voltage: 2.80V
DRAM + 0.3V: Disable

[DRAM Config]

DRAM Frequency: 200 (1:1)
CPC: Enable
Tcl: 2.5
Trcd: 03
Tras: 08
Trp: 03
Trc: 11
Trfc: 14
Trrd: 03
Twr: 03
TWtr: 02
Trwt: 05
Tref: 3120
DRAM Bank Interleave: Enable

DQS Skew Control: Auto
DQS Skew Value: 0
DRAM Drive Strength: Auto
DRAM Data Drive Strength: Auto
Max Async Latency: Auto
DRAM Response Time: Normal
Read Preamble: Auto
Idle Cycle Limit: 256 Cycles
Dynamic Counter: Disable
R/W Queue Bypass: 16x
Bypass Max: 7x
32 Byte Granularity: Disable (4 Bursts)

[Electric Bill]

Sorry Big.
Didn't notice this until just now.
That's the problem with stickies.
They don't go to the top of the thread list when a new post has been made.

I've been having problems for the last few weeks with bsods usually when I'm browsing so I've been experimenting.
BIOS Memtest - OK
SuperPI 32M - OK
3DMark01 - OK
Disconnecting USB devices.
Uninstalling apps (still not sure about Skype).
Monitoring CPU and RAM usage in Task Manager.
Checking Temps with PC Wizard, Guardian, Everest, etc.
Running HD diagnostics.
Checking event viewer.
Dropped oc to 10x250MHz.
And probably a lot more things I can't recall atm.

Anyway so far going to a PCI LAN card seems to be working.

Here's what I'm currently using.
1.)
Specs
REQUIRED
-Motherboard - LanPartyUT NF4 Ultra-D
-CPU Opteron 146
-BIOS version - 704-2BTA
-RAM brand OCZ Platinum Elite PC4800 2x512MB
-Video card - eVGA GeForce 7800GT
-Power Supply - OCZ PowerStream 520
-CPU cooling Zalman CNPS7700
-Optional: 1-36GB Raptor, 1-Maxtor 160GB SATA, 1-Maxtor 20GB IDE, NEC 3520A DVD borner, Sony Floppy, Dell FP2000 monitor, Belkin SOHO KVM switch.

2.)
BIOS settings
01/20/07
Beta BIOS 704-2BTA
Genie BIOS Setting
_______________________
>DRAM Configuration - Press Enter
FSB Bus Frequency - 290
LDT/FSB Frequency Ratio - x3.0
LDT Bus Transfer Width - d16u16
CPU/FSB Frequency Ratio - x10.0
PCI eXpress Frequency - 100MHz
K8 Cool'n'Quiet Support - Disable
xCool'n'Quiet MAX FID - Auto
CPU VID StartUp Value - 1.425V
CPU Core Voltage - 1.46V
LDT Bus Voltage - 1.30V
Chip Set Voltage - 1.70V
DRAM 2.5 Voltage - 2.85V
CPU VID Control - 1.350V
CPU VID Special Control - Above VID * 110%
LDT Voltage Control - 1.30V
Chip Set Voltage Control - 1.70V
DRAM Voltage Control - 2.80V
DRAM+ .03V If it's not 3.2V - Disable
PCI eXpress Configurator - X2 X1 X16 X1
MAC Lan - Disabled
MAC Media Interface - Pin Strap
Machine MAC (NV) Address - Disabled
xMAC (NV) Address Input - Press Enter
MAC Lan Boot ROM - Disabled
Internal Phy SATA 1/2 - Enabled
Internal Phy SATA 3/4 - Disabled
VIA 1394 Control - Disabled
MARVELL GigaLAN Control - Disabled
Run Mem Test 86+ - Disabled
DRAM Configuration
_______________________
DRAM Frequency Set (MHz) - 180=RAM/FSB:09/10
Command Per Clock (CPC) - Enabled
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row cycle time (Trc) - 08 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh period (Tref) - 3120 Cycles
DRAM Bank Interleave - Enabled
DQS Skew Control - Increase Skew
DQS Skew Value - 0
DRAM Drive Strength - weak 3
DRAM Data Drive Strength - Level 3
Max Async Latency - Auto
DRAM Response Time - Fast
Read Preamble Time - Auto
Idle Cycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16x
Bypass Max - 04x
32 Byte Granularity - Disable (4 Bursts)

3.)
Screenshot
Working on #3.
Going to my archives.
Well here's the best I can do right now.
Screenie with MSI 6600GT card and OCZ Platinum rev 2 2x512. http://newportyachtdirectory.com/nF4...y/Screenie.gif
Screenies with OCZ Platinum Elite PC4800 2x512MB and above vid card. http://newportyachtdirectory.com/nF4...800_10x300.gif and http://newportyachtdirectory.com/nF4...tor_10x300.gif unfortunately not all on the same screen.

[loonym]

DFI LANPARTY UT nF4 SLI EXPERT - 12/07/05 BIOS

AMD Opteron 150 Venus CABGE 0534SPMW

2x512MB G.Skill PC3200 GBLE (F1-3200DSU2-1GBLE)

2*eVGA 7800GT CO 256MB, 470/1100 81.98 drivers

Seagate ST3250823AS SATA

Lite-On Combo SOHC-5235 CDRW

OCZ PowerStream OCZ520ADJ ATX 520W Power Supply



==========



Genie BIOS Settings:

FSB Bus Frequency - 300
LDT/FSB Frequency Ratio - 3
CPU/FSB Frequency Ratio - 10
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - Auto

CPU VID Control - 1.475v
CPU VID Special Control - Above VID * 104%
LDT Voltage Control - 1.30v
Chip Set Voltage Control - 1.62v
DRAM Voltage Control - 2.80v

DRAM Configuration Settings:

DRAM Frequency Set - By DRAM SPD Value
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 2.5
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 07 Bus Clocks
Row precharge time (Trp) - 03 Bus Clocks
Row Cycle time (Trc) - 08 Bus Clocks
Row refresh cyc time (Trfc) - Auto
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - Auto
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Fast
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest 2.20:

http://home.midmaine.com/~rachelm/dfiocdb1gle.jpg


3dMark2003:

http://home.midmaine.com/~rachelm/dfi031gle.jpg


3dMark2005:

http://home.midmaine.com/~rachelm/dfi051gle.jpg



==========



short description:
300x10 @ 3000Mhz, 1.475v + 104%
2.5-3-8-3 @ 2.8v vdimm

[PhoetuS]

DFI LANPARTY UT NF4 Expert - BIOS 12/07/2005
AMD Opteron 170 - CCBBE 0615 DPMW
G.SKILL Extreme Series 2 x 1GB DDR500 Model F1-4000USU2-2GBHZ
OCZ GameXStream 700W PSU
Sapphire x1900xt 702/801 Driver: Omega 3.8.273 (Cat 6.7)
2x80gb Maxtor DiamondMax 10 HDD RAID-0
Plextor PX-740A DVD-RW

Cooling:
CPU: Storm Rev. 2
GPU: Maze4 Low Profile
RAD: GT Stealth 360
Pump: MCP655

Genie BIOS Settings:

FSB Bus Frequency.............................  -  300
LDT/FSB Frequency Ratio.......................  -  x3
CPU/FSB Frequency Ratio.......................  -  x10
PCI eXpress Frequency.........................  -  100Mhz

CPU VID StartUp Value.........................  -  StartUp

CPU VID Control...............................  -  1.325v
CPU VID Special Control.......................  -  Above VID * 109.6%
LDT Voltage Control...........................  -  1.20v
Chip Set Voltage Control......................  -  1.52v
DRAM Voltage Control..........................  -  2.68v

DRAM Configuration Settings:

DRAM Frequency Set............................  -  166=RAM/FSB:05/06
Command Per Clock (CPC).......................  -  Enable
CAS Latency Control (Tcl).....................  -  3
RAS# to CAS# delay (Trcd).....................  -  4
Min RAS# active time (Tras)...................  -  8
Row precharge time (Trp)......................  -  4
Row Cycle time (Trc)..........................  -  7 Bus Clocks
Row refresh cyc time (Trfc)...................  -  14 Bus Clocks
Row to Row delay (Trrd).......................  -  02 Bus Clocks
Write recovery time (Twr).....................  -  02 Bus Clocks
Write to Read delay (Twtr)....................  -  02 Bus Clocks
Read to Write delay (Trwt)....................  -  03 Bus Clocks
Refresh Period (Tref).........................  -  3684 Cycles
Write CAS Latency (Twcl)......................  -  1
DRAM Bank Interleave..........................  -  Enabled

DQS Skew Control..............................  -  Auto
DQS Skew Value................................  -  0
DRAM Drive Strength...........................  -  7
DRAM Data Drive Strength......................  -  Level 2 (Reduce 30%)
Max Async Latency.............................  -  8ns
DRAM Response Time............................  -  Normal
Read Preamble Time............................  -  5.5ns
IdleCycle Limit...............................  -  256 Cycles
Dynamic Counter...............................  -  Disable
R/W Queue Bypass..............................  -  16 x
Bypass Max....................................  -  07 x
32 Byte Granularity...........................  -  Disable(4 Bursts)

Prime 95 + CPUZ 1.37 + 3DMark01 + Everest 2.80 Ultimate + A64 Info .61

3DMark03

3DMark05

3DMark06

short description:
300x10 @ 3000Mhz, 1.325v + 109.6% = 1.452v
3-4-8-4 @ 2.68v vdimm

[xploit]

1.)Specs
-Motherboard ( NF4 Ultra-D)
-CPU (Athlon 64 4400+) NaKeD*
-BIOS version ( N4D702-3)
-RAM brand (1gb DC PATRIOT XBLK PC4800) and amount ( 2x512MB)
-Video card(s) (ATI X800XL)
-Power Supply (ANTEC NEO HE 430)
-CPU cooling (ZALMAN CNPS9500 LED)

Genie BIOS Settings:

FSB Bus Frequency - 270
LDT/FSB Frequency Ratio - 3
CPU/FSB Frequency Ratio - 10
PCI eXpress Frequency - 101Mhz <--!!!

CPU VID StartUp Value - Auto

CPU VID Control - 1.55v <-- AIR COOLED its safe!!!!
CPU VID Special Control - Auto
LDT Voltage Control - 1.40v
Chip Set Voltage Control - 1.30
DRAM Voltage Control - 2.70v
DRAM+.03V IF NOT 3.2 - ENABLE

DRAM Configuration Settings:

DRAM Frequency Set - 200 mhz 1:1
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 04 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 04 Bus Clocks
Row Cycle time (Trc) - 07 Bus Clocks
Row refresh cyc time (Trfc) - Auto
Row to Row delay (Trrd) - 02 Bus Clocks
Write recovery time (Twr) - 02 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3120
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Normal
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)

[Radiohead]

Are you interested in all the timings in all my DFI boxes Bman. I'd be more than willing. Did you want the bios revisons as wellI I have a real mismsh of boxes and memory mixes on the go riht now. zSome are fairly finely twealked others just up and running with the bulk of settings at default. I've even been having some pretty good results useing the CVS sticks, Samsung and the hynix as well. These were all cheap sticks and they've all been good into the 240 with the cas at 2.5 or 3. What about the RDX as well" Are you interested in these tidbits as well?

[Big B-man]

Yeah, anything you can post is helpful. I've seen a lot of threads around that were mostly for the NF4 SLI/Ultra's, but not much else...especially the RDX guys. The more info, the better. This thread is for all DFI boards, not just the NF4's, so the more the RDX guys put in, the better.

[xploit]

I like this setup better for gaming.In PI I changed the Affinity to test both cores individually and Both PASSED without a problem.

1.)Specs
-Motherboard ( NF4 Ultra-D)
-CPU (Athlon 64 4400+) NaKeD*
-BIOS version ( N4D702-3)
-RAM brand (1gb DC PATRIOT XBLK PC4800) and amount ( 2x512MB)
-Video card(s) (ATI X800XL)
-Power Supply (ANTEC NEO HE 430)
-CPU cooling (ZALMAN CNPS9500 LED)

Genie BIOS Settings:

FSB Bus Frequency - 300
LDT/FSB Frequency Ratio - 3
CPU/FSB Frequency Ratio - 9
PCI eXpress Frequency - 101Mhz <--!!!!!

CPU VID StartUp Value - Auto

CPU VID Control - 1.55v <-- AIR COOLED its safe!!!!
CPU VID Special Control - 104% My temperature goes to 36c on my naked CPU
LDT Voltage Control - 1.40v
Chip Set Voltage Control - 1.40
DRAM Voltage Control - 2.70v
DRAM+.03V IF NOT 3.2 - ENABLE

DRAM Configuration Settings:

DRAM Frequency Set - 200 mhz 1:1
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 05 Bus Clocks
Min RAS# active time (Tras) - 11 Bus Clocks
Row precharge time (Trp) - 05 Bus Clocks
Row Cycle time (Trc) - AUTO
Row refresh cyc time (Trfc) - Auto
Row to Row delay (Trrd) - AUTO
Write recovery time (Twr) - AUTO
Write to Read delay (Twtr) - AUTO
Read to Write delay (Trwt) - AUTO
Refresh Period (Tref) - 3120
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - Auto
DRAM Data Drive Strength - Auto
Max Async Latency - Auto
DRAM Response Time - Normal
Read Preamble Time - Auto
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 07 x
32 Byte Granularity - Disable(4 Bursts)

[Big B-man]

442 views, and only 5 entries. Come on DFI'ers, I know full well this isn't the only guys with a DFI board running around.

[Radiohead]

DFI SLI FX55 Memtimings as follows.
2X1gig OCZ Platinum 3200 DC defaults of 5-2-3-2


FSB Bus Frequency............................. 200 MHz
LDT/FSB Frequency Ratio....................... 5
CPU/FSB Frequency Ratio....................... Auto
PCI eXpress Frequency......................... 100

CPU Voltage .................................. Auto
LDT Voltage .................................. 1.20v
ChipSet (NF4) Voltage ........................ 1.52V
DRAM Voltage ................................. 2.71V
+0.03 if not 3.2V ............................ N/A

Memclock (DRAM Frequency) .................... 200
1T/2T Timing (Command Per Clock).............. 1T
CAS Latency (Tcl)............................. 2T
RAS# to CAS# delay (Trcd)..................... 3T
Min RAS# active time (Tras)................... 8T
Row precharge time (Trp)...................... 2T
Row Cycle time (Trc).......................... 10T
Row refresh cyc time (Trfc)................... 16T
Row to Row delay (Trrd)....................... 3T
Write recovery time (Twr)..................... 3T
Write to Read delay (Twtr).................... 2T
Read to Write delay (Trwt).................... 3T
Refresh Period (Tref)......................... Auto
DRAM Bank Interleave.......................... Enabled

DQS Skew Control.............................. Auto
DQS Skew Value................................ 0
DRAM Drive Strength........................... Level 8, 9, or 10
DRAM Data Drive Strength...................... Level 1 (Reduce 50%) or 2 (Reduce 30%)
Max Async Latency............................. 8ns
DRAM Response Time............................ Normal
Read Preamble Time............................ 6ns
IdleCycle Limit............................... 64
Dynamic Counter............................... Disable
R/W Queue Bypass.............................. 16x
Bypass Max.................................... 4x
32 Byte Granularity........................... Disable (4 Bursts)

Now these are the stock settings for stock speeds. FX55

[Big B-man]

Keep the stats flowing guys!

[Zoltan 1500]

DFI LANPARTY UT nF4 SLI-D - BIOS (704-22V6) BIGTOE TWEAKED 704-2a / MemTest v1.65 Added By Tmod

AMD Athlon 64 X2 Dual Core Processor 4600+ Toledo

OCZ OCZ400512ELPE 2X512MB DDR PC3200

OCZ GameXStream 600W PSU, Model OCZ600GXSSLI

BFG Geforce 7600GT-OC X2 SLI 256MB PCI-E x16 Video Cards

1-ST3250824AS (250 GB, 7200 RPM, SATA-II) 1-Maxtor 6L200R0 (200 GB, 7200 RPM, Ultra-ATA/133)

ATAPI DVD DD 2X16X4X16

Thermaltake CL-P0114 Big Typhoon

Genie BIOS Settings:



FSB Bus Frequency.............................  -  250

LDT/FSB Frequency Ratio.......................  -  x4.0

CPU/FSB Frequency Ratio.......................  -  12.0

PCI eXpress Frequency.........................  -  100Mhz



CPU VID StartUp Value.........................  -  Start-Up



CPU VID Control...............................  -  1.375v

CPU VID Special Control.......................  -  Above VID *104%

LDT Voltage Control...........................  -  1.30v 

Chip Set Voltage Control......................  -  1.50v

DRAM Voltage Control..........................  -  2.80v



DRAM Configuration Settings:



DRAM Frequency Set............................  -  200=RAM/FSB:01/01

Command Per Clock (CPC).......................  -  Enable 

CAS Latency Control (Tcl).....................  -  03 Bus Clocks

RAS# to CAS# delay (Trcd).....................  -  03 Bus Clocks

Min RAS# active time (Tras)...................  -  08 Bus Clocks

Row precharge time (Trp)......................  -  03 Bus Clocks

Row Cycle time (Trc)..........................  -  12 Bus Clocks

Row refresh cyc time (Trfc)...................  -  24 Bus Clocks

Row to Row delay (Trrd).......................  -  03 Bus Clocks

Write recovery time (Twr).....................  -  03 Bus Clocks

Write to Read delay (Twtr)....................  -  02 Bus Clocks

Read to Write delay (Trwt)....................  -  03 Bus Clocks

Refresh Period (Tref).........................  -  3120 Cycles

Write CAS Latency (Twcl)......................  -  Auto

DRAM Bank Interleave..........................  -  Enabled



DQS Skew Control..............................  -  Auto

DQS Skew Value................................  -  0

DRAM Drive Strength...........................  -  Auto

DRAM Data Drive Strength......................  -  Auto

Max Async Latency.............................  -  Auto

DRAM Response Time............................  -  Normal

Read Preamble Time............................  -  Auto

IdleCycle Limit...............................  -  256 Cycles

Dynamic Counter...............................  -  Disable

R/W Queue Bypass..............................  -  16 x

Bypass Max....................................  -  07 x

32 Byte Granularity...........................  -  Disable(4 Bursts)

Prime95 + 3DMark2001SE + CPU-Z:









3DMark03:













3DMark2006:









Short Description:

250x12 @ 3000Mhz, 1.375v + 104%

3-3-8-3 @ 2.8v vdimm

[Zoltan 1500]

in time i will get ya some info on an expert running 3.0 right now with lots of room to go higher, got a sli-dr new coming and a 590-sli when i figure it out when time allows, and a nf3 250gb never could get it to do much so running stock. but have learned alot more since then so may give it another try.