http://www.thermalright.com/a_page/m...ation_hr11.htm
great idea but the way it extends out itll be impossible to install on teh lwoer card and even on the top card me thinks it will hit the cpu hs, nb sink or something in between lol
yummy
Results 46 to 60 of 63
-
08-06-2007, 12:11 AM #46
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
Last edited by _dangtx_; 08-06-2007 at 12:13 AM.
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-06-2007, 01:41 PM #47
I never finish anythi
- Joined
- Oct 2002
- Location
- Illinois
- Age
- 41
- Posts
- 4,314
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
You'd need to install one so the pipes hang over the long edge of the card (like in the first pic) and install that card in the lowest slot. Then, install the other one so the pipes are like the last pic, and install that one in the top slot. As long as there isn't any interference from the pipes off the main cooler (like the HR-03 on the top card), then you should be OK.
-
08-08-2007, 08:14 PM #48
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
what should i do with this guy?
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-08-2007, 10:38 PM #49
I never finish anythi
- Joined
- Oct 2002
- Location
- Illinois
- Age
- 41
- Posts
- 4,314
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
How big is it? What kind of CFM and noise level? I have some ideas
-
08-09-2007, 12:56 AM #50
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
i picked it up from a rc airplane thing. no idea about specs. they dont tell u..soemthign to do with chosing a dc motor for it or such
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-09-2007, 01:06 AM #51
I never finish anythi
- Joined
- Oct 2002
- Location
- Illinois
- Age
- 41
- Posts
- 4,314
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
How wide is it? Maybe you could use it for an intake on the side panel into the CPU fan...
-
08-09-2007, 01:07 AM #52
I never finish anythi
- Joined
- Oct 2002
- Location
- Illinois
- Age
- 41
- Posts
- 4,314
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
Either that or use it as a "floater"-cooler
-
08-09-2007, 01:08 AM #53
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
http://www.google.ca/search?hl=en&q=...e+Search&meta=
front of the case most probably. its not humongous
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-09-2007, 01:14 AM #54
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
lol!
Originally Posted by t_ski
Either that or use it as a "floater"-cooler
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-13-2007, 11:33 PM #55
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
http://www.pcmasters.de/hardware/rev...ex-2007/1.html
get ready to drool..thsi is what im talkn about yo!
heatsink with a 35cm fan
and what a chipset cooler lol
Last edited by _dangtx_; 08-13-2007 at 11:35 PM.
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-13-2007, 11:38 PM #56
I never finish anythi
- Joined
- Oct 2002
- Location
- Illinois
- Age
- 41
- Posts
- 4,314
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
Very cool, but not practical unless it's on a workbench all the time. I can imagine having issues to find a case that will work with it and the motherboard, too.
-
08-13-2007, 11:54 PM #57
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
are you talking about the chipset cooler? doesnt look too tall once u measure it comparatively to the components on the board..and teh 35cm heatpipe thing..o man that thing could run fanless me thinks
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
08-14-2007, 12:09 AM #58
I never finish anythi
- Joined
- Oct 2002
- Location
- Illinois
- Age
- 41
- Posts
- 4,314
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
Nah, I was talking about the monster 35cm heatsink.
-
09-11-2007, 01:55 PM #59
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
lets see..i pin modded a few more cpus recently, took it easy with the modding tough
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
-
11-10-2007, 11:25 PM #60
minghia sto' fsb mazza !
- Joined
- Mar 2004
- Location
- mtl,canada
- Age
- 35
- Posts
- 37,305
Re: upcoming mod e4300 1066/1333 fsb <> 1.41vcore
add a couple 120mm fans overhead to drop temps by 10+ celsiusD.S.C-12(2)-disclaimer : whatever u do with your hardware/software is your
responsibility, which i dont hold if u break anything
GRAB here OcBible v1.55 and Guidemania v1.21
scary pooch?pooch#1taking ball from dogpooch pulln on ropeme on board after 2 years
of no board http://gonny.se/ <-cool lady http://www.mediafire.com/?8dmg21ms1vx
IN MEMORY OF HOW BM WAS TREATED HERE...
Reply With Quote
