Results 1 to 4 of 4
  1. #1
    Joined
    Jan 2011
    Posts
    2

    Question Samsung spinpoint F4 SMART attribute Program_Fail_Cnt_Total huge reading

    Hi guys

    I have a couple of new Samsung Spinpoint F4 HD204UI drives. After less than 2 days it has a weird (and huge!) reading on one of the SMART attributes: Program_Fail_Cnt_Total:

    Code:
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       0
      2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
      3 Spin_Up_Time            0x0023   067   067   025    Pre-fail  Always       -       10030
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       3
      5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
      8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
      9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       44
     10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       3
    181 Program_Fail_Cnt_Total  0x0022   098   098   000    Old_age   Always       -       45263884
    191 G-Sense_Error_Rate      0x0022   252   252   000    Old_age   Always       -       0
    192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
    194 Temperature_Celsius     0x0002   064   064   000    Old_age   Always       -       27 (Lifetime Min/Max 26/30)
    195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
    196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       0
    223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
    225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       3
    Does anyone know what that attribute is for? I can only find a post on a swedish forum, feeling uneasy about a "high number" of ~12.000 for the attribute.
    I have a reading of 45.000.000
    Do I need to worry?

  2. #2
    Joined
    Oct 2003
    Location
    Edmonton, Alberta
    Posts
    1,775

    Re: Samsung spinpoint F4 SMART attribute Program_Fail_Cnt_Total huge reading

    First disable S.M.A.R.T. in the bios then download the Seagate utilities from their web site and check your drive.

    I don't know anyone that has had much success using S.M.A.R.T.
    Asus M8Z77-V Deluxe
    Intel 3770K
    G-Skill 1600 16G
    Corsair H100
    EVGA 670 GTX
    2 Corsair Force 3 120G (Raid 0)
    2 x Seagate 1T 6G
    2 Samsung SyncMaster T260HD Monitors
    Thermaltake Level 10 UGK
    Silverstone Olympia OP1000 1000W
    Windows 8

    Never argue with idiots, they will drag you down to their level and beat you with experience.

  3. #3
    Joined
    Jun 2002
    Location
    catford south london
    Posts
    8,208

    Re: Samsung spinpoint F4 SMART attribute Program_Fail_Cnt_Total huge reading

    yep i agree had a wd it said was dying is still here 5 years on
    P5Q Deluxe
    Intel QX 6700
    8 GB OCZ
    60 GB Vertex drive
    ATI 5850
    SILENCER 610 WATT





  4. #4
    Joined
    Jan 2011
    Posts
    2

    Re: Samsung spinpoint F4 SMART attribute Program_Fail_Cnt_Total huge reading

    OK, thanks. I'll try not to think about it. At least not about that particular attribute... :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •