Results 1 to 2 of 2
  1. #1
    Joined
    Jul 2011
    Posts
    1

    Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    Mainboard : GA ep45t udl3r 2200 mhz+
    Cpu : Q 9650 3.0 Ghz
    CPU cooler : Zalman Cnps 10x extreme
    Graphic Card: GTX 260 Amp2
    Ram: Corsair Dominator 1600 mhz cl 8
    Power supply: Xilence 1000 watt
    Case : HAF 932
    [i looked this settings from the Everest program]
    1600 mhz cl8 timings
    tRRD[6].........................................[ 6 ]
    tWTR[6].........................................[ 6 ]
    tWR[12].........................................[ 12 ]
    tRFC[88]........................................[ 88 ]
    tRTP[5].........................................[ 6 ]
    Command Rate (cmd)[0]...........................[ 1 ]




    I'm suffering from blue screen problem
    Although i applied the bios settings that showed below, it cannot provide stability and i'm taking BSOD(Blue Screen of Death)

    Motherboard Intelligent Tweaker

    Robust Graphics Booster.........................[ Turbo ]
    CPU Clock Ratio.................................[ 9x ]
    Fine CPU Clock Ratio............................[ + 0.0 ]
    CPU Frequency 4.14GHz...........................[ 445x9 ]

    Clock Chip Control

    CPU Host Clock Control..........................[ Enabled ]
    CPU Host Frequency (Mhz)........................[ 445 ]
    PCI Express Frequency (Mhz).....................[ Auto ]
    C.I.A 2.........................................[ Disabled ]

    Advanced Clock Control

    CPU Clock Drive.................................[ 900mv ]
    PCI Express Clock Drive.........................[ 900mv ]
    CPU Clock Skew..................................[ 0ps ]
    MCH Clock Skew..................................[ 50ps ]

    DRAM Performance Control

    Performance Enhance.............................[ Extreme ]
    Extreme Memory Profile(X.M.P.) [ Disabled ]
    (G) MCH Frequency Latch.........................[ 400 ]
    System Memory Multipler.........................[ 4.00D ]
    Memory Frequency 1066...........................[ 1780 ]
    DRAM Timing Selectable..........................[ Manual ]

    CAS Latency Time................................[ 8 ]
    tRCD............................................[ 8 ]
    tRP.............................................[ 8 ]
    tRAS............................................[ 24 ]

    tRRD[4].........................................[ 4 ]
    tWTR[5].........................................[ 5 ]
    tWR[14].........................................[ 10 ]
    tRFC[74]........................................[ 64 ]
    tRTP[5].........................................[ 5 ]
    Command Rate (cmd)[0]...........................[ 1 ]

    Channel A Timing Settings

    Static tRead Value (PL) [ ] ................[ 9 ]

    Channel B Timing Settings

    Static tRead Value (PL) [ ] ................[ 9 ]

    Motherboard Voltage Control

    Load-Line Calibration...........................[ Enabled ]
    CPU Vcore [ ]...................[ 1.33125 ]
    CPU Termination [ ]...................[ 1.40 ]
    CPU PLL [ ]...................[ 1.55 ]
    CPU Reference [ ]...................[ 0.911 ]

    MCH Core [ ]...................[ 1.420 ]
    MCH Reference [ ]...................[ 1.926 ]
    MCH/DRAM Refernce [ ]...................[ Normal ]
    ICH I/O [ ]...................[ Normal ]
    ICH Core [ ]...................[ Normal ]

    DRAM Voltage [ ]...................[ 1.98 ]
    DRAM Termination [ ]...................[ Normal ]
    Channel A Ref [ ]...................[ Normal ]
    Channel B Ref [ ]...................[ Normal ]

  2. #2
    Joined
    Aug 2004
    Posts
    10,583

    Re: Q9650 & GA EP45t ud3lr & 2x2 4 gb1600 mhz cl8 O.C. HELP

    I believe yo are having memory problems. First of all you are overvolting the memory, and DDR3 does not like that, you may have fried it already*. I know if you touch a stick it will be HOT. 1.65v is it's rated voltage for 1600, also you are running it over 1700. Try setting the timings to 9-9-9-24 to over clock it.

    *I would memtest at it's rated setting before anything else.

    Good Luck


    "The significant problems we face cannot be solved at the same level of thinking we were at when we created them."
    - Albert Einstein (1879-1955)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •