Results 1 to 2 of 2
  1. #1
    Jan 2013

    Need help with my ram installation

    Alright so I just bought this RAM DDR3 4 GB 1333 Mhz PC3-10600, 512M x 64, 256M x 8, 1.5v and on my laptop a toshiba satellite L675-S710 I have these in there 2x DDR3 2 GB PC3-8500 running at 533 mhz I dont know If I should just remove one of the 533mhz 2 GB rams and put in the 1333mhz 4GB and have all 6GB running at 533mhz or install only the 4GB 1333mhz on there I'm pretty stumped might sound stupid and also in a couple weeks I'm going to purchase the same 4GB ram to make my ram to 8GB but till then what should I do?
    Last edited by Bigjosepi; 01-03-2013 at 11:53 AM.

  2. #2
    Aug 2002
    Sacramento, Ca.

    Re: Need help with my ram installation

    It's not a good idea to mix memory, the best suggestion I can give you is to return the memory you just got and get an 8Gb kit with matched two 4Gb sticks. Even getting a single 4Gb stick now and another in a couple of weeks isn't the same as getting a matched set.
    Electronic Smoke Signals From my "Techno Teepee"
    ASUS Crosshair V Formula AM3+ 990FX, 1703 bios
    AMD FX 8350 Vishera @ 5142Mhz [21x244] 1.536v
    Water Cooled - Koolance EX2-1055, CPU 370 WB, Idle=22c Load=53c
    32Gb G.Skill Sniper ddr3 1600 8G X 4 , 9-9-9-24 @ 1.55v
    ASUS HD7970-DC2T-3GD5, Cat 13.6 beta 2, Dell U3011 @ 2560x1600
    SanDisk Extreme 120GB SSD SATA 6Gb, 250Gb SATA 6Gb, 1Tb SATA 6Gb x2
    Win 7 Ultimate 64bit, Corsair Obsidian 800D, Corsair HX1000w PSU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts