Yes! I got everything working now!

4cores · § #1 11-06-2009, 02:12 PM

http://valid.canardpc.com/show_oc.php?id=812226
AMD Phenom II X4 955 Processor @ 3.6GHz
GA-MA790XT-UD4P - NB @ 2400MHz
RAM : 8192 MB DDR3 Dual Channel
RAM Speed : 669.7 MHz (3:10) @ 6-6-6-18
GPU Type : NVIDIA GeForce GTX 260 55 nm core 216
GPU Clocks : Core 590 MHz / RAM 999 MHz
DirectX Version : 10.0

What do you think? everything look good here?

3.6GHz is as high as I can go without raising the CPU voltage.
temps 28C idle & 51c max in prime 95

Poci · § #2 11-06-2009, 02:40 PM

What are you waiting for? Raise voltage!!!
Assuming you have proper cooling.

4cores · § #3 11-06-2009, 02:59 PM

When you raise the CPU voltage do you have to raise the nb voltage with it? I am still new to this lol

DDR3 voltage +.050 to get 1.650v
NB voltage normal
CPU-NB +.075 for NB @ 2400MHz
CPU voltage normal

Cooling is only a Cooler Master Hyper TX3 but it is working better than I expected!

edit:
stock cooler temps: 37C idle & 56C max in prime 95
Hyper TX3 temps: 28C idle & 51c max in prime 95
and I can turn up the fans more to lower it more

Poci · § #4 11-06-2009, 03:40 PM

Quote:

Originally Posted by 4cores

When you raise the CPU voltage do you have to raise the nb voltage with it? I am still new to this lol

DDR3 voltage +.050 to get 1.650v
NB voltage normal
CPU-NB +.075 for NB @ 2400MHz
CPU voltage normal

Cooling is only a Cooler Master Hyper TX3 but it is working better than I expected!

edit:
stock cooler temps: 37C idle & 56C max in prime 95
Hyper TX3 temps: 28C idle & 51c max in prime 95
and I can turn up the fans more to lower it more

Theres NB voltage and CPU-NB voltage.
One is for memory controller on CPU and one should help overall NB speed if im not mistaken

4cores · § #5 11-07-2009, 01:51 AM

Quote:

Theres NB voltage and CPU-NB voltage.
One is for memory controller on CPU and one should help overall NB speed if im not mistaken

So would I only increase the cpu voltage or would i have to raise the other ones more with it?

**TheGlasMan** · § #6 11-07-2009, 11:50 AM

just the cpu at this point, just a tick. I assume you are using 18x200 which requires no other changes (including the ones you have done). When you bump the HTT clock other busses get over clocked.

bldegle2 · § #7 11-09-2009, 09:34 AM

you should be able to easily run the NB @2800 or 3000 (I am running my 965 @2800 with ease), you may or may not have to raise the NB volts....you will see and feel the increase big time when you raise the NB, add a little more clockage if you feel like it...

a little screamer for sure....

laterzzzzzz.....